I responded to the stickied post above, but its hard for everyone to see that I have posted a reply to that one, so here goes.

I’ve just begun to play around with the EMS myself and am trying to input the starting fix. I put the tooth time to 500 and check the box that reads “sync early” then I save. When I check to see that my update saved, it drops my tooth time to 50 ms, but it leaves sync early checked (which tells me it saved)

Anyone else have a similar problem with the tooth time?

Thanks guys!

-Andy

 

You have to hit the return/enter key when you make a change.

 

i press save, then i cant remember the command, but i guess i didnt specifically hit "return", but i pressed the shortcut button that applys the command to the ecu. its not the same?

 

When you make a change in an option box, like say in your case where you wanted it to be 500 instead of 50 then you will type in 500 and hit enter thus the change will take place. You will see in the bottom left hand of the status bar(bottom left of the screen) that it will be flahing "cal changed" in red, of course if you are making multiple changes this will be blinking until you save the file.

 

thanks, i'll do that.

 

f2 for quick save.