just installed aem and the car wont start

Reply Subscribe

Thread Tools

Search this Thread

Jul 14, 2011, 05:31 PM

#31

TheBoz

Evolved Member

iTrader: (9)

Join Date: Jan 2005

Location: Space time

Posts: 1,278

Likes: 2

Received 14 Likes on 13 Posts

Also you need to make sure your car is reading in Gas.

Configure -> Units

Select AFR Units.

Then Choose Lambda, hit apply. Then Choose AFR Gasoline, hit apply.

On AEM Pro it says it is in Gas by default but it is not, so you need to update the units.

Reply Like

Jul 14, 2011, 08:59 PM

#32

n2oiroc

Evolved Member

Thread Starter

iTrader: (33)

Join Date: Jul 2009

Location: milwaukee, wi

Posts: 3,180

Likes: 0

Received 5 Likes on 5 Posts

Quote:

Originally Posted by TheBoz

When you log your AFR's whare are you seeing.

ALso make sure to sync you WB.

http://www.youtube.com/user/AEMEMSTe.../0/RSLA97NkuCU

if when you tap your gas the WB pegs out to full lean that is a tip in issue.

Quote:

Originally Posted by TheBoz

wideband is all set up and the units are set to gasoline. i havent bothered with the laptop since i saw that the raw voltage coming out was way off and cutting out. i made up some test leads and im going to rule out a ground or power supply issue before anything else. thanks for the input!