I have an evo8 with a v2 aem ems that im trying to setup a trogger disk 12 tooth disk on. Before you start saying go search. I already have and all the threads have never had any answer posted. I found the one from kigglys sight. But it is not working. Stat sync turns on just not firing up. I can see change on all the t1per t2per etc

 

Did you perform a timing sync which is absolutely required?

The only Series 2 car I've done with a trigger disc needed a lot of ignition sync adjustment before it fired because it was so far out.

Try the following as a starting point:

Ignition Sync "19.141"
Pickup Delay Comp "109.6"

Also don't forget to turn OFF the "EVO IX" option. This is the quick start feature Series 2 has for the stock 2 tooth crank/cam setup but with the trigger disc its no longer going to work.

Give that shot as a starting point report back and I'll help get you going.