12.3@111
Jun 11, 2005, 02:59 PM
#1
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: boise Idaho
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
12.3@111
Made 3 passes last night and all were 12.3. Mods are custom 3inch no cat, safc, hks drop in, 110 octane. My best 60ft. was 1.71. Ill post the slips tonight. i need cams I want 11s.
Last edited by whiteevo311; Jun 12, 2005 at 05:07 PM.
Jun 11, 2005, 09:23 PM
#4
Originally Posted by whiteevo311
Made 3 passes last night and all were 12.3. Mods are custom 3inch no cat, safc, hks drop in, 110 octane. My best 60ft. was 1.71. Ill post the slips tonight. i need cams I want 11s.
Jun 12, 2005, 05:10 PM
#7
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: boise Idaho
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Warrtalon
Not sure how you did that on stock boost...the power has to come from somewhere. Great job cutting a 1.71 on the stock clutch. I love the mod list...similar to me, but I have an MBC yet stock dp/cat. I only expect 12.4@110 on pump, but that's with boost increased and taper removed.
Me neither but it holds 20psi to redline in 4th, and Ive never touched it. It seems to hold more on race gas which seems weird but it does. It only holds 18 to redline in 4th on pump. I think I could cut a 1.6 60ft with lower tire pressure. Pressue was at 35 all the way around.
Trending Topics
Jun 12, 2005, 07:00 PM
#8
Originally Posted by whiteevo311
Me neither but it holds 20psi to redline in 4th, and Ive never touched it. It seems to hold more on race gas which seems weird but it does. It only holds 18 to redline in 4th on pump. I think I could cut a 1.6 60ft with lower tire pressure. Pressue was at 35 all the way around.
What clutch are you using? I figured stock since it's not listed, nor have you had the car for long, but then I'd like to know how you cut such low 60' times. My clutch is weak and doesn't grab hard at all, so I have to slip it some before hammering it. Even if I did dump the clutch, it wouldn't hold all the power, so that's not an option, even if I had wanted to try. Lowering the tire pressure won't help your 60' unless you are spinning...is that what's happening even on the 1.71? I still don't spin my tires yet...
Jun 13, 2005, 06:28 AM
#10
Originally Posted by whiteevo311
yes my car spins them out of the hole. I just didnt think my stock clutch would hold so I left the pressure alone. Im gonna try next time.
Jun 16, 2005, 08:28 PM
#12
Jun 16, 2005, 09:56 PM
#14
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: boise Idaho
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
my friends sti with exhaust, intake, fmic, 20g turbo and ****ty tuning. he tore me down out of the hole. his car will soon be an 11 second monster. he was pissed that I tore him down.
Jun 16, 2005, 10:08 PM
#15
Evolving Member
iTrader: (12)
Join Date: May 2005
Location: Meridian, ID
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Warrtalon
Who says I can't? I haven't tried yet. My 12.8@106 without exhaust is just fine...
Tomorrow, we'll see what I can do with pump gas then with 110unleaded on the stock cat.
Tomorrow, we'll see what I can do with pump gas then with 110unleaded on the stock cat.
i dont think you'll come close to his times, although it looks like your a decent driver, hell, look at the one's from az they have NAWZZZ and ton more mods and they're running what he's running with an exhaust, afc, and mbc
.....i think he might be a little quicker this sat. night at the street legal drags guess we'll just have to wait and see