1/4 Mile Times
1/4 Mile Times
I just ran my car completely stock at Englishtown this Saturday
I launched at 4000 RPM with the water spray on Auto
I had a 1.86 60 Ft Time
and ran 13.83 @ 99 MPH
I have seen some better runs so I gave it another shot
trying to come out at 5000 RPM's but it bogged off the line
and I ended up running a 14.41
I am going to use the 13.83 as my baseline for stock
and go back after Install the rest of my goodies.
I launched at 4000 RPM with the water spray on Auto
I had a 1.86 60 Ft Time
and ran 13.83 @ 99 MPH
I have seen some better runs so I gave it another shot
trying to come out at 5000 RPM's but it bogged off the line
and I ended up running a 14.41
I am going to use the 13.83 as my baseline for stock
and go back after Install the rest of my goodies.
What kind of gas were you running? How full was the tank? Remove the spare and tools?
13.8 seems kind of crappy to me. I am going to Maple Grove this friday (weather permitting). I previously ran a 13.46 at Beaver springs, but it is a small track.....
You need to dump it at 6000rpm or higher depending on the track.... i think it does more damage to your car bogging than spinning a little.
13.8 seems kind of crappy to me. I am going to Maple Grove this friday (weather permitting). I previously ran a 13.46 at Beaver springs, but it is a small track.....
You need to dump it at 6000rpm or higher depending on the track.... i think it does more damage to your car bogging than spinning a little.
I had 93 Octane Mobil.
The bog was probably because of my
50/50 BOV the only modification I have
I think I am going to get a Forged Recirc.
But I should be in the 12's in about 2 weeks.
after Install my S-AFC II,RMR Intake,RMR Turbo Back Exhaust
and GFB Manual Boost Controller.
Next I am going to get the tranny built up and a better clutch
and a roll cage because to go 11's you need that.
No Roll Cage No runs at E-town.
To run 11's I am going to upgrade all of the Intercooler
Piping,Bigger Intercooler and Radiator,660cc Injectors,Walbro Fuel Pump,Pruven Pressure Regulator and turn up the boost.
Probably run about 22 PSI.
Extrude Hone Intake and Head and install cams,Larger Throttle Body and Bigger Turbo and you could be looking at 10's
So Yeah I understand my run wasn't the best but I 'll take it for now since that was the first time I ever ran the car at the track.
And it's been 10 years since I have been to the track period.
The 13.80 was not great but I think I may be losing some boost on the high end my gauge was hitting about 17 PSI which may or may not be 100% accurate but I am going to replace my BOV
with the stock one and see what boost readings I get.
my 1.8 sec 60 ft. is pretty damn good
I was told 1.7 would probably be the best I could do stock.
The bog was probably because of my
50/50 BOV the only modification I have
I think I am going to get a Forged Recirc.
But I should be in the 12's in about 2 weeks.
after Install my S-AFC II,RMR Intake,RMR Turbo Back Exhaust
and GFB Manual Boost Controller.
Next I am going to get the tranny built up and a better clutch
and a roll cage because to go 11's you need that.
No Roll Cage No runs at E-town.
To run 11's I am going to upgrade all of the Intercooler
Piping,Bigger Intercooler and Radiator,660cc Injectors,Walbro Fuel Pump,Pruven Pressure Regulator and turn up the boost.
Probably run about 22 PSI.
Extrude Hone Intake and Head and install cams,Larger Throttle Body and Bigger Turbo and you could be looking at 10's
So Yeah I understand my run wasn't the best but I 'll take it for now since that was the first time I ever ran the car at the track.
And it's been 10 years since I have been to the track period.
The 13.80 was not great but I think I may be losing some boost on the high end my gauge was hitting about 17 PSI which may or may not be 100% accurate but I am going to replace my BOV
with the stock one and see what boost readings I get.
my 1.8 sec 60 ft. is pretty damn good
I was told 1.7 would probably be the best I could do stock.
Hey
Are you the one with JDM ver7 tail light that i spotted on grand street C-Town ? anyway come to our meet and wish you will join the crew . on August 2 , Alley Pond Park , Flushing . Time start at 11.00 am and BBQ there .
Trending Topics
I am hoping to make the meet if I don't work that day.
My EVO looks the same way it did when it came from the factory except for a Blue VividRacing WIndshield Sticker.
Where at Alley Pond Park exactly is this meet?
My EVO looks the same way it did when it came from the factory except for a Blue VividRacing WIndshield Sticker.
Where at Alley Pond Park exactly is this meet?
Direction
If you heading east bound at LIE 495 get off at exit 29 springfield blvd then turn right at the light go straight for like 2 miles you'll see the park on your right hand side .
Thread
Thread Starter
Forum
Replies
Last Post
Ta/Fc1383
General Engine Management / Tuning Forum
1
Jun 17, 2016 09:05 PM
FS[South]: Evo 8 front and rear Calipers only
mrcox
For Sale - Suspension / Brakes / Handling
2
May 2, 2016 08:33 AM
Evodetailer123
Evo X Dyno Results
4
Jun 30, 2015 11:24 AM




