Buschur Budget Evo power 12.91@107!
.
Re: Buschur Budget Evo power 12.91@107!
Originally posted by Noize
BR intake, BR muffler delete pipe, SAFC II with BR settings, Hallman MBC@20psi, and Pruven test pipe.
~4500 slip.. Too weak for a launch I know, but wanted to be nice to the stock clutch. Came out of the hole with a 1.88 second 60', upshifted to second at redline, went to third and at the top I bumped fuel cut past redline (never interrupted that early before), and into fourth. I finished off at 12.91@107mph. 1/8th was 8.32@86.4mph. FWIW, that's a tenth quicker than my VF30 wrx in the quarter, and two thousands of a second faster in the 1/8. Traps are 2mph higher in both places, even hitting the limiter and with a crummy launch.
I'm confident it has a 12.70 in it with a good 1.70 short time. Not bad for so few mods and a crap run. Thanks for making affordable parts that work available, Buschur Racing!!
BR intake, BR muffler delete pipe, SAFC II with BR settings, Hallman MBC@20psi, and Pruven test pipe.
~4500 slip.. Too weak for a launch I know, but wanted to be nice to the stock clutch. Came out of the hole with a 1.88 second 60', upshifted to second at redline, went to third and at the top I bumped fuel cut past redline (never interrupted that early before), and into fourth. I finished off at 12.91@107mph. 1/8th was 8.32@86.4mph. FWIW, that's a tenth quicker than my VF30 wrx in the quarter, and two thousands of a second faster in the 1/8. Traps are 2mph higher in both places, even hitting the limiter and with a crummy launch.
I'm confident it has a 12.70 in it with a good 1.70 short time. Not bad for so few mods and a crap run. Thanks for making affordable parts that work available, Buschur Racing!!
NICE! Did the gaskets work with the TEST Pipe I sent you?
Eric
Sorry guys; haven't been on here in awhile.
Those gaskets did work great, Eric; thanks! But I need to sell the Buschur muffler delete pipe and the pruven test pipe now, because I got a Buschur magnaflow turbo-back, which I put on earlier this week.
I will say that those two parts together were a phenomenal bang for the buck and really helped well, taking out the restriction of the OEM muffler and cat. I need to get on over to the for sale forum and do a package deal on selling them together.
Bring on the vf30 WRXes!
Those gaskets did work great, Eric; thanks! But I need to sell the Buschur muffler delete pipe and the pruven test pipe now, because I got a Buschur magnaflow turbo-back, which I put on earlier this week.
I will say that those two parts together were a phenomenal bang for the buck and really helped well, taking out the restriction of the OEM muffler and cat. I need to get on over to the for sale forum and do a package deal on selling them together.
Bring on the vf30 WRXes!
Thread
Thread Starter
Forum
Replies
Last Post
StreetThisEvo
Drag Racing
28
Aug 4, 2009 12:04 PM
Mellon Racing
Drag Racing
230
Feb 1, 2009 08:03 PM
David Buschur
Evo Engine / Turbo / Drivetrain
65
Dec 5, 2005 06:09 AM
