16" Rotas & QTP's with the stock brakes!

Reply Subscribe

Thread Tools

Search this Thread

Aug 27, 2012 | 09:33 AM

#151

edpettit_TSI

Newbie

iTrader: (4)

Joined: Aug 2009

Posts: 47

Likes: 0

From: Philadelphia, PA

Quote:

Originally Posted by evodan2004

bumping this back up.

did we determine if these Rota Slipstreams are doable with 20MM spacers. i know some guys did it but didnt some have issues?? or was that something else. if they work what is the size rim do i need to order. thanks.

Mine fit fine with the 20mm spacers (although it looks super close). I also have the rear rolled.

Aug 27, 2012 | 12:40 PM

#152

Dragking2189

Evolved Member

iTrader: (52)

Joined: Mar 2008

Posts: 800

Likes: 2

From: Florida

Quote:

Originally Posted by Dragking2189

Which spacer brand did you use? Ichiba, h&r or the regular ones on ebay?

Anyone?

Last edited by Dragking2189; Aug 13, 2013 at 07:57 PM.

Aug 29, 2012 | 04:49 PM

#153

rodent

Evolved Member

iTrader: (35)

Joined: Apr 2006

Posts: 700

Likes: 3

From: Highlands Ranch, CO

Quote:

Originally Posted by Dragking2189

Which spacer brand did you use? Ichiba, h&r or the regular ones on ebay?

Ebay but I verified they were 20mm exactly. My 22mm ebay spacers are 22mm exactly so it shouldn't matter what brand.

Aug 29, 2012 | 06:47 PM

#154

Dragking2189

Evolved Member

iTrader: (52)

Joined: Mar 2008

Posts: 800

Likes: 2

From: Florida

Quote:

Originally Posted by rodent

Ebay but I verified they were 20mm exactly. My 22mm ebay spacers are 22mm exactly so it shouldn't matter what brand.

do you think with a 22mm spacer I have to shave my oem wheel studs ? what do you recomemd just getting Arp long wheel studs?

Aug 30, 2012 | 09:49 AM

#155

uterus!

Newbie

iTrader: (2)

Joined: Apr 2006

Posts: 82

Likes: 0

From: Denver

Quote:

Originally Posted by Dragking2189

do you think with a 22mm spacer I have to shave my oem wheel studs ? what do you recomemd just getting Arp long wheel studs?

If you plan on using the spacer with studs on the slipstream wheel you will either have to cut your oem studs down or drill the wheel to allow the oem studs to pass though.

I wil be installing the ARP extended studs with mine.

Aug 31, 2012 | 12:36 PM

#156

rodent

Evolved Member

iTrader: (35)

Joined: Apr 2006

Posts: 700

Likes: 3

From: Highlands Ranch, CO

Quote:

Originally Posted by uterus!

^^^^ This

I love my ARP studs since I can just slip the spacers/wheels on and check for correct lug torque frequently. Makes the choir of swapping the racing slicks much easier since you only have to loosen/tighten 20 lugs and not 40 with the bolt on spacers. I pressed the studs out of my bolt on spacers BTW. Be sure to get hub centric spacers.