**my thoughts exactly!!

 

Invidia N1 = full 3", looks like the Buschur pic, no neckdowns anywhere either.

The reality is that the soda/beercan is really only 2.6" diameter

 

going to check my 5 zigen.

 

Good, that saved me time from doing it myself. I would have not been happy if it didnt pass.

 

What about the TurboXS Catback?!

 

funniest thing i have heard today

 

Awaiting results of this ..

 

That's not Greddy its Apexi GT spec thanks again for the tune

 

I have the Apexi and it does not come out that far.

 

I know it used to sag down another 1.5 inches cause it didnt have a catch for the hanger above the muffler but I had a locar muffler shop fix that

 

Corrected - thanks !

 

Did not know that. Good info.

 

I was a little concerned when AMS told me that my HKS HiPower muffler, along with the custom catback was less than 3" inside the muffler and at the taper, i.e. no mandrel. That was until they disconnected my exhaust after the downpipe, and seen little to no increase in power. Just an FYI!

 

Don't you mean BEER-ly fits. nudge, nudge, know what I mean, say no more, say no more. (sorry, Monty Python thing going through my head).


New "Turbo" mag did a test on some exhaust systems. Nice little read/info thing for some of you to check out. They didn't use any of the smaller "tuner" shop exhaust systems though. No BR, no AMS, RNR or things like that. Pretty much all big name companies.

Gave weight, HP and TQ, increases over stock, and a deciable reading at idle and at 3000 rpms.

 

Yes