Car Won't Start After Re-flash
Thread Starter
Evolving Member
iTrader: (9)
Joined: Nov 2004
Posts: 285
Likes: 0
From: Northern Iraq
I just received back my reflash, and my car won't start I called you and left a message and this is a very big problem seeing as my car is my only means of transportation. The car will turn over but I am not getting any spark. THe car ran fine before the reflash and now won't start everything was triple checked and the only option is the ECU. Let me know what you can do.
that happend to me at the va dynoflash meet. funny coz al thought that my car is an 05 so he did the flash then boom car wont start. so finally he found out that my car is an 04 ssl so after couple of tweeks walaa.... done. well i hope you gave him the right info about mods and year of car.
Trending Topics
He didn't re-write your car's immobilizer code into the flash, which most likely contained another Evo's code...so your evo thinks it's a different car at the moment. If you have a Tactrix Cable and laptop and EcuFlash on there, go to user settings, set it to developer, restart the program, find immobilizer code after reading the ECU, and then type in FFFF for it. I was told that's a universal code that will allow your car to start.
Originally Posted by 4cefed
I just received back my reflash, and my car won't start I called you and left a message and this is a very big problem seeing as my car is my only means of transportation. The car will turn over but I am not getting any spark. THe car ran fine before the reflash and now won't start everything was triple checked and the only option is the ECU. Let me know what you can do.
First check all fuses - there are two in the kick pannel that have gone bad on occassion - if that is not the problem - then
Please send the ecu back and I will test it and replace it if it is defecvtive
Approx one out of every 1,000 ecus go bad in shipping and handling
Also mistakes are occassioanly made - not often but it has happend
In any event everything I do is backed with a full warranty and your ecu will be replaced at no charge if it was damaged
Sorry for your inconvienince
Finally - you may wish to some to my LA tuning trip on Sat with your ecu so i can test your ecu and replace it on the spot if its bad - just a thought
Last edited by DynoFlash; Aug 29, 2006 at 09:52 PM.
Originally Posted by Mitchubishi
He didn't re-write your car's immobilizer code into the flash, which most likely contained another Evo's code...so your evo thinks it's a different car at the moment. If you have a Tactrix Cable and laptop and EcuFlash on there, go to user settings, set it to developer, restart the program, find immobilizer code after reading the ECU, and then type in FFFF for it. I was told that's a universal code that will allow your car to start.
FYI - we do not alter imobilizer codes on mail in flashes and I do not use taxtrix cables on those so the imobilizer is left untouched
Al
Originally Posted by 4cefed
would it get done faster if i came up to LA on Sunday?? Thanks for the help this is my second reflash and your service has always been great.
I will bring another with me to replace it on the spot and install your imobilizer code if needed
Al



.