Where do you pick one up?

 

where do you pick what up? The LC1 can be gotton at innovate.com or other vendors on here sell them aswell

 

Best price for LC-1 I've found

 

Do I need to buy this USB to serial cable if I'm going with the LC-1? I'll be using it with a laptop and Evoscan.
http://www.axceleratedmotorsports.co....cfm?ProdID=49

Also, how does it attach to the exhaust? I have a downpipe with cutout (dumps straight out from a bypass valve off the downpipe), so I don't think I can use the stock o2 port off of the catback. Do I need to drill a hole in my downpipe?

 

You will need the adapter.

Just get this: http://www.newegg.com/Product/Produc...82E16812119002

 

Do you have a serial port? If not then yes. The bung for the o2 sensor goes 18" from your turbo. So yes on your DP

 

What does the bung look like? Is it a clip that I can just attach to the open part of the cutout valve? or do I really have to drill a hole in the downpipe (I'm trying to avoid a permanent install if possible). Does the link below come with a bung?
http://www.axceleratedmotorsports.co....cfm?ProdID=47

 

Hmm if your trying to avoid a perminat install you might want to look at the innovate lm1.
The bung looks like a little ring but thick. You need to tap your dp and then weld the bung in there. The bung should come with the kit. It also comes with a plug for the bung. So you could take it out but you soder the wires in. I got mine from innovate. TouringBubble got his from there he can tell you but it should come with everything.

Look at the LM1 I think thats what you want
http://www.innovatemotorsports.com/products/lm1.php