Hi

I have problem to open the Hex file for JDM EVO 8 2003 with ECU no: MN 132750.
The hex file downloaded succesfully with Ecuflash v1.33 and got a pop up menu with 3 option & I chose the last one & than selected the Evo 8 JDM rom file.

I could open the file but the timing table were all over the place or mess up.
It uses Internal ID: 93660005 base on ROM Info data.

I think I need different Definition file for this ECU.

Can somebody help me with this problem?

Thank you for your attention & help

Regards
Setiawan

 

Try this XML file.

 

this version has the MUT table defined and two byte load addresses are
8960 8961

 

haha... beat you to it!

 

: ya sure did quick off the draw ya were,lol

 

Thank you very much to Chamama & BarryC for super quick respons!! ..

Anyway since I am not really good at this kind of program, so what is the different between Chamama xml file and BarryC xml program?

Sorry for my noob question. Please be patient with me.

Thanks again

 

Its just a definition file for the particular ROM ID. Whichever meets your purpose is fine.
Copy/paste Barry's XML file to the rommetadata->mitsubishi->evo folder in ecuflash. Then reopen ECUflash and your rom. You will be able to see the different fields defined properly.

For further info, there are several tutorials available in this forum.

 

I have a 93660005 as well. Can't seem to find much threads on this ROM!

So all I have to do to get 2 byte load working in my car is to put 8960 and 8961 at MUT00 and MUT01 in the MUT table? ie. put them at the first 2 cells in the first row?

Does anyone have the 2 byte RPM as well? and I would just put these at MUT02 and MUT03?

I also notice that you have Tephra mod defined. I would assume these would not work as the ROM that I am using is straight from my car? And I would be safe to reflash this ROM (edited with 2 byte addresses) back to my car as long as I don't touch anything in the Tephra category?

Thanks!

 

2byte rpm is 0xFFFF893E 0xFFFF893F mut 02 and 03
pm'd ya also

 

Thx guys, I have been looking for this info.....

 

Hi I have been trying to find a definition file for this lancer evolution 8 bin file. I could not seem to find a match. Can someone help me get the correct xml definition file for ecuflash? I will attach my bin file on this reply. I also do not mind buying coffee for someone who can help.

Kind regards,
Cris

 

just flash it with another known evo 8 file, that would be the easiest solution

 

that is not a bad idea, but would it not cause problem with checksum? Would you know a good bin generic file?

 

is it a jdm import ?

 

yes it is