Help with CEL
Help with CEL
Hi Guys and Gals,
I just bought a 2006 JDM EVO 9 MR, and I am thinking of getting upgraded downpipe and test pipe that will replace the stock Catalytic Converter. What worried me is the CEL. I was wondering if there is a way to eliminate the CEL to go off that is related to the CAT DELETE ONLY, apart from using the mechanical CEL fix. I am wondering if Stock ECU Reflash could make the CEL gone (Or disable the secondary O2 sensor)?
On a side note, i was so happy that I could fine this forum as all the other evoution forums are not as good as this.
Thats why I enter this forum and look for help regarding this issue (hopefully JDM EVO and USDM EVO will react the same to this circumstances). Thank you in advance people. Cheers.
I just bought a 2006 JDM EVO 9 MR, and I am thinking of getting upgraded downpipe and test pipe that will replace the stock Catalytic Converter. What worried me is the CEL. I was wondering if there is a way to eliminate the CEL to go off that is related to the CAT DELETE ONLY, apart from using the mechanical CEL fix. I am wondering if Stock ECU Reflash could make the CEL gone (Or disable the secondary O2 sensor)?
On a side note, i was so happy that I could fine this forum as all the other evoution forums are not as good as this.
Thats why I enter this forum and look for help regarding this issue (hopefully JDM EVO and USDM EVO will react the same to this circumstances). Thank you in advance people. Cheers.
If I remember correctly, there's a patch out there to turn off the CEL. But remember, disabling will only turn it off in the dash. The ecu will still notice it, and you will fail emissions
Thanks for all the inputs. If disabling the Secondary O2 sensor is possible, then I do not think that the ECU will notice it, therefore the car will run normal (as in not in protection mode or something) as if there was never a secondary O2 sensor initially. By the way, there is no emission test in my country.
All other inputs will be greatly appreciated.
I would much rather disabling the secondary O2 sensor through ECU flash if possible rather than having the mechanical CEL fix.
Thank you
All other inputs will be greatly appreciated.
I would much rather disabling the secondary O2 sensor through ECU flash if possible rather than having the mechanical CEL fix.
Thank you
Trending Topics
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
One... I think. I'll have to look again. I didn't do it. It came done on the car when I picked it up. But it absolutely doesn't work for s***.
Its so randomly comes on too. Sometimes I get a couple hundred miles, sometimes I get like right down the street from clearing it and DING... SES. Now that puts me in a midget kicking fit of rage...
Its so randomly comes on too. Sometimes I get a couple hundred miles, sometimes I get like right down the street from clearing it and DING... SES. Now that puts me in a midget kicking fit of rage...
Last edited by Asmodeus6; Feb 21, 2008 at 04:49 PM.
96940011 - the USDM 05 Rom.
The one I begged you to rip apart in your other thread.
Now you see why Tephra. I still rock your patched rom because the CEL on knock is awesome. And even tho it still works with the CEL on... its nicer when its off.
The one I begged you to rip apart in your other thread.
Now you see why Tephra. I still rock your patched rom because the CEL on knock is awesome. And even tho it still works with the CEL on... its nicer when its off.






I have to clear it all the time its SO annoying.