I now tune an EDM EVO IX. Stock Launch Limit is 5500RPM, which sometimes not enough. I cant find, where can I change it. Can help somebody?

 

if you have ECUflash and a tachrix cable, pull the rom and change the Stationary Rev Limit

 

I already tried it, but nothing happend.

 

did you write the modified rom back to the ECU?

 

Yes, I Upload the modificated versions. Every changes is succesfull, ignition, fuel, tables, Rev limits, everything except launch limits.

 

bad definition probably...

 

How can I solve the problem?

 

post up what the value was BEFORE you changed it?

was it 5500?

 

I wrote 5500 the RPM. Really is it just 5200. Stock value was in the field 2250 I changed it many times, to 2000, 2500, 3000 , 5000, 7000, and always nothing happend.

 

Stock value should be 5000 rpms, not 5500. Make sure you are editing the "stationary rev limit" value

 

lol - so you assumed that 2250 = 5000?

no...

if the value you are changing doesn't "appear" correct (ie 2250 is clearly not 5500 or 5000) then dont change it.

post up your definition for the stat rev limit, ie the address its using, and you romid...

 

I'm guessing you are running a 88840016 rom becourse it has the wrong address in ecuflash. The address should be 274a

 

HoP was right, there was wrong address problem. I adjust correct address, and change units to RPM, and now can I use this function.
Thanks help for everyone!

 

Just to remember. Dont forget to change back the former changed wrong values.
Maybee use a backup. Because you dont know what you have changed there.