Knock control - load vs RPM table found
90550001:
Multipliers:
177a 13
24a8 18
21dc 20
EDIT - I had a request for this one, but didn't realise I'd already done it and posted in #98 https://www.evolutionm.net/forums/6400308-post98.html
Multipliers:
177a 13
24a8 18
21dc 20
EDIT - I had a request for this one, but didn't realise I'd already done it and posted in #98 https://www.evolutionm.net/forums/6400308-post98.html
Last edited by jcsbanks; Dec 30, 2008 at 10:53 AM.
96260007 has a 14 item Multiplier vs RPM table:
0x5680 Multiplier
0x6cb4 RPM
Edit because I was using 96260007, will post 96260009 later.
0x5680 Multiplier
0x6cb4 RPM
Edit because I was using 96260007, will post 96260009 later.
Last edited by jcsbanks; Jan 3, 2009 at 06:58 AM.
What do i need to add to the xml for 96260009 i added this but something aint right
<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cb4" type="X Axis" elements="14" scaling="RPM"/>
</table>

<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cb4" type="X Axis" elements="14" scaling="RPM"/>
</table>
96260009:
<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cc8" type="X Axis" elements="14" scaling="RPM"/>
</table>
Just the RPM scaling address is different. Apologies for the error, I had assumed that all 9626xxxx were the same.
<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cc8" type="X Axis" elements="14" scaling="RPM"/>
</table>
Just the RPM scaling address is different. Apologies for the error, I had assumed that all 9626xxxx were the same.
96260009:
<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cc8" type="X Axis" elements="14" scaling="RPM"/>
</table>
Just the RPM scaling address is different. Apologies for the error, I had assumed that all 9626xxxx were the same.
<table name="Knock Multiplier" category="Knock Control" address="5680" type="2D" level="2" scaling="uint8">
<table name="X" address="6cc8" type="X Axis" elements="14" scaling="RPM"/>
</table>
Just the RPM scaling address is different. Apologies for the error, I had assumed that all 9626xxxx were the same.



