Evoscan 2.5 maptracer question
#1
Evolved Member
Thread Starter
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Evoscan 2.5 maptracer question
Is anyone having a problem with the maptracer in evoscan 2.5? I had it working great on my first laptop, but i've since switched to a different laptop and loaded back evoscan with my serial # and all...everything else works except the maptracer. I loaded my XML and my HEX files, and it brings up the correct data (my high octane and ignition maps) but when I load my .csv log it doesnt show anything.
Anyone experienced this...
Anyone experienced this...
#6
Evolved Member
Thread Starter
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Is there something specific that I need to be logging for the map tracer to work? I went back to my old laptop (the one where map tracer worked fine) and loaded my most recent logs (the ones from the new laptop) and same thing, nothing comes up when I check an item. So I took a log from my old laptop and tried it on my new laptop's evoscan and it worked. This leads me to believe that I'm not logging something that I should be.
#7
Is there something specific that I need to be logging for the map tracer to work? I went back to my old laptop (the one where map tracer worked fine) and loaded my most recent logs (the ones from the new laptop) and same thing, nothing comes up when I check an item. So I took a log from my old laptop and tried it on my new laptop's evoscan and it worked. This leads me to believe that I'm not logging something that I should be.
Trending Topics
#11
Evolved Member
Thread Starter
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Well to be totally honest I dont know which item(s) I didn't select that caused it not to work so I just duplicated the selection from my previous laptop and it worked. If I remember correctly I was only logging rpm, tps, 1byte load, timing, knock sum, knock volt, and wideband. Apparently it needed one or more items to be selected.
#12
Evolved Member
Thread Starter
iTrader: (30)
Join Date: Oct 2006
Location: Fl/Jam
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Oh btw, when you rescale your load axis, is there some change that needs to be made in evoscan to reflect this. I'm now exceeding the load on my IX (300% load) so I rescaled it to 320. But when I make a log, whenever it gets to that load it freaks out.
Any suggestions?
Any suggestions?
#13
Evolved Member
iTrader: (26)
Join Date: Oct 2007
Location: Colorado Springs, CO
Posts: 1,989
Likes: 0
Received 0 Likes
on
0 Posts
I'll bet its the loadcalc that had to be selected.
As for your load freaking out, mine was doing the exact same thing when using the 1byte load mod. I reverted back to the 2byteload for now. I haven't had a chance to ask mrfred if I can increase the chartmax for 1byteload yet.
-E
As for your load freaking out, mine was doing the exact same thing when using the 1byte load mod. I reverted back to the 2byteload for now. I haven't had a chance to ask mrfred if I can increase the chartmax for 1byteload yet.
-E