ok I downloaded ecuflash 1.41 and everything works correctly. I can change the values for FAA AND FCA.

Do I need to change the values in the tables below also, or am I fine
EGR MAP check 1
EGR MAP check 2
EGR Pressure Diff
and
ECU periphery2



thank you again and if you are ever in the michigan LANSING area, I NEED TO buy you a beer for your help

 

Really I am just glad I could help out.

The Periphery 2 you have realy isn't needed any more. That was an earlier discovery before the full bit listing.

As for the other EGR tables, I don't believe they matter if you disable the EGR using the Bits. Those EGR tables are for the JDM MAP sensor patch you have. I wouldn't mess with them.

Tell you what, you finding me a great deal on a JDM MAP sensor would surely help me out.

Paul

 

Sounds like a plan, I have a few friends who are at dealerships in michigan, I can see if they have the hook up on the JDM map sensor.

I will keep you posted and once again, I sincerely appreciate all the help you have given me

warren

 

Paul

sorry to bring this back up , but I loaded the new values that I changed in the FCA AND FAA boxes and all my codes went away, however after about 15 minutes the CEL came on with a p0138 code, I believe this is the rear O2 sensor,
I looked in the attached file to disable the p0138 code, but I did not find it. is there another way to disable it ?

thanks again