Could someone please share this info with me?

I have been trying for a while now to locate the right data for the MUT tables to modify it so I can log the 2byte airflow in my 2.61 evoscan and the 96260009 rom withou success.

Please help.

Cheers.
P.

 

check out evo wiki site or search for the 3D MUT tabel in this forum.

i can post later, kinda busy now.

 

Rolly,

I have tried to find this info for a while now without success. I would really appreciate it if you post it here when you can.

Cheers,

 

https://www.evolutionm.net/forums/ec...ml#post7056799

Look at posts #222, #223 and #224. Tephra said to use 8984 and 8985 for 2-byte Load and nitz confirmed that they worked. The values are the same for my rom, 96420008. See if the other values work for 96260009.

96420008
2byte load
MUT 00 = 8984
MUT 01 = 8985

2byte RPM
MUT 02 = 8962
MUT 03 = 8963

2byte AirFlow
MUT 04 = 89E2
MUT 05 = 89E3

MUT 3D TABLE ADDRESS = 39FA0

 

http://evoecu.logic.net/wiki/96260009

But the information is not filled in...

 

Thanks MusterNuter for that.

I will give it a go.

 

Hey Hey, easy on the name!

Good Luck, I hope it works out for you.

 

http://evoecu.logic.net/wiki/96260009#RAM_Addresses

 

Confirmed 2-byte Airflow is 89E2 89E3 for 9626 series roms.

Can I make a suggestion here, leave MUT location 00 and 01 as stock values, so a scan tool can read airflow in gm/sec.

I mod MUT locations 02 and 03 for 2-byte spark load (baro compensated) and set MUT 04 and 05 for 2-byte Airflow (as we normally do here). EvoScan xml will have to be tweaked for this though.