Correcting a few 96530006 definitions

Reply Subscribe

Thread Tools

Search this Thread

Oct 5, 2009 | 10:51 AM

logic

Thread Starter

Evolved Member

iTrader: (2)

Joined: Apr 2003

Posts: 1,022

Likes: 7

From: Berkeley, CA

Correcting a few 96530006 definitions

These are what appear to be errors in the XML that ships with EcuFlash. For historical/search purposes, the version of EcuFlash I'm working with (and hence, the XML version) is 1.42, and might not (hopefully won't) apply to future versions.

Relative Air Density vs. Temp for Airflow/Hz at 333e:
The "Degrees" axis for this is listed as 69be (, but it looks like it ought to be 6af0. Values are different between axes. I've also seen this table referred to as "Air Temperature Compensation".

Desired ISCV initial step position with AC off-Drive at 4296, and
Desired Idle RPM-Neutral at 427a:
The axis listed is 6aa0, but it looks like 6a86 is correct. Axis values are the same, so it's not a big deal.

I would some extra eyes on this to confirm, though.

Oct 5, 2009 | 11:54 AM

scheides

iTrader: (10)

Joined: Oct 2006

Posts: 4,827

Likes: 13

From: Minneapolis

Cool! Maybe this will help make idle more tweakable! I'll try it.

Oct 8, 2009 | 10:22 AM

Jack_of_Trades

Evolved Member

iTrader: (17)

Joined: Jun 2007

Posts: 3,523

Likes: 2

From: Opelika,AL

NVM, useless post.

Oct 8, 2009 | 10:24 AM

binky

Evolved Member

iTrader: (11)

Joined: Oct 2007

Posts: 1,430

Likes: 1

From: Connecticut / Massachusetts U.S.A

Quote:

Originally Posted by Jack_of_Trades

NVM, useless post.

So they aren't backwards?

-Bink

Oct 8, 2009 | 03:00 PM

Jack_of_Trades

Evolved Member

iTrader: (17)

Joined: Jun 2007

Posts: 3,523

Likes: 2

From: Opelika,AL

Actually, I browsed over his first post after I posted it and thought he already had that listed but I guess I was wrong lol.

DESIRED IDLE RPM-NEUTRAL and DESIRED IDLE RPM-DRIVE are labeled backwards.

DESIRED IDLE RPM-NEUTRAL address = 426c
DESIRED IDLE RPM-DRIVE address = 427a

,

Last edited by Jack_of_Trades; Oct 8, 2009 at 03:03 PM.

Oct 8, 2009 | 03:09 PM

logic

Thread Starter

Evolved Member

iTrader: (2)

Joined: Apr 2003

Posts: 1,022

Likes: 7

From: Berkeley, CA

Yep, you're right; good catch.

Oct 9, 2009 | 10:25 PM

03whitegsr

Evolved Member

iTrader: (8)

Joined: Nov 2006

Posts: 4,001

Likes: 17

From: Utah

I'm working on going through 96530006 as well and the Base EGR Pulse width tables looks incorrect as well. Original is Red, suggested is next to it.

I just started looking up the tables so I could be wrong though.

Code:

<table name="Base EGR Duty Cycle" address="46db">
        <table name="Load" address="6c9C"/>
	<table name="RPM" address="6d24"   6C7E/>
</table>

Last edited by 03whitegsr; Oct 9, 2009 at 10:28 PM.

Correcting a few 96530006 definitions

Correcting a few 96530006 definitions

Trending Topics