TephraMod V7
#1621
Evolved Member
iTrader: (23)
something I found making the switch between 706 and 715:
Was on 706, made a 715 to suit and downloaded it, it took several tries. On the new bin file the car ran fine. Then when checking the afr, I found the fuel map looked screwy . So I checked the rom ID and it had spontaneously switched to 706. All the maps have screwy inputs.
Doesn't matter to me, the real 706 works fine. Just thought I'd point out what can happen.
Was on 706, made a 715 to suit and downloaded it, it took several tries. On the new bin file the car ran fine. Then when checking the afr, I found the fuel map looked screwy . So I checked the rom ID and it had spontaneously switched to 706. All the maps have screwy inputs.
Doesn't matter to me, the real 706 works fine. Just thought I'd point out what can happen.
#1624
Evolving Member
Join Date: Aug 2009
Location: Herndon, VA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
#1625
iTrader: (10)
I was helping a buddy tonight with his 88591715 rom and he had pulled the zip file (with xml) from post #2, option 3. It was missing the evo9base.xml file from the original r3compile .zip file, so if you're having problems, try that. I sent an updated .zip file so it should be hosted sometime shortly.
#1627
Evolved Member
94170715 is missing "max load boost cut" under the turbo settings. I opened up 96530706 and it has it. Is this an error? I usually set that to max because I'm on a MBC.
#1628
Evolved Member
iTrader: (39)
Regular single load (max of 319) is just enabled on the mods ROM if you want double load enabled (max of 638) then you have to change the hex to enable double load then adjust the double load table appropriately. Otherwise you just adjust the single load table appropriately.
#1632
Evolving Member
Join Date: Mar 2010
Location: Behind a laptop in FLA
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts