TephraMod V7
Feb 9, 2011, 06:07 PM
#2177
Evolving Member
iTrader: (1)
Join Date: Jun 2007
Location: Melbourne, Australia
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
I gave 96530706 another go last night.
Copied the MAF scaling, injector size and voltages, and copied the periphery settings from my 90550001 rom.
Still no go. starts, then coughs and soon as I give it throttle it chokes and dies, tried the same thing about 10 times, was reeking of fuel after that.
Had no time to reset the idle.
Copied the MAF scaling, injector size and voltages, and copied the periphery settings from my 90550001 rom.
Still no go. starts, then coughs and soon as I give it throttle it chokes and dies, tried the same thing about 10 times, was reeking of fuel after that.
Had no time to reset the idle.
Feb 9, 2011, 06:09 PM
#2178
ive done 2 evo 7's on v7 already both seem fine.. of course it does require changes for throttle hang, slight bogging etc.. but its all easily tuned out
1byte is more accurate then 2byte. when i log 1byte beside 2byte i see more blackouts in 2byte then i do in 1byte.
1byte is more accurate then 2byte. when i log 1byte beside 2byte i see more blackouts in 2byte then i do in 1byte.
Feb 9, 2011, 09:17 PM
#2181
Evolving Member
Noob question sorry. I'm trying to use dual maps on v7 and can't seem to get back to the main map once I've enabled the Alt Map (via AutoICS). The ICS just keeps flashing no matter how often (or long) I hold down the button!
Everything I've read says you "hold down the "Auto ICS" button for a predefined period of time" to toggle between maps. What is this predefined period? Is that the 'Alternate Map Time to Activate'? Mine is set to 20ms - perhaps this is too short?
Settings attached.
Everything I've read says you "hold down the "Auto ICS" button for a predefined period of time" to toggle between maps. What is this predefined period? Is that the 'Alternate Map Time to Activate'? Mine is set to 20ms - perhaps this is too short?
Settings attached.
Feb 10, 2011, 01:04 AM
#2182
Evolved Member
Have tried the stock one, burgers22's one that he posted on Geek'd and tscomp's map that he ran On GSRvR's at the start.
Obviously changed injector scaling and latency voltages to the stock settings in 9055.
Do you change any MAF scalings Burnzy? I know where you're coming from though, it idles a touch rough for a second or two and soon as I touch the throttle it dies, like it's got no map to use.
Feb 10, 2011, 07:34 AM
#2184
Noob question sorry. I'm trying to use dual maps on v7 and can't seem to get back to the main map once I've enabled the Alt Map (via AutoICS). The ICS just keeps flashing no matter how often (or long) I hold down the button!
Everything I've read says you "hold down the "Auto ICS" button for a predefined period of time" to toggle between maps. What is this predefined period? Is that the 'Alternate Map Time to Activate'? Mine is set to 20ms - perhaps this is too short?
Settings attached.
Attachment 165184
Everything I've read says you "hold down the "Auto ICS" button for a predefined period of time" to toggle between maps. What is this predefined period? Is that the 'Alternate Map Time to Activate'? Mine is set to 20ms - perhaps this is too short?
Settings attached.
Attachment 165184
Feb 10, 2011, 05:33 PM
#2186
Evolving Member
iTrader: (1)
Join Date: Jun 2007
Location: Melbourne, Australia
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Nope, plain jane 0706.
Have tried the stock one, burgers22's one that he posted on Geek'd and tscomp's map that he ran On GSRvR's at the start.
Obviously changed injector scaling and latency voltages to the stock settings in 9055.
Do you change any MAF scalings Burnzy? I know where you're coming from though, it idles a touch rough for a second or two and soon as I touch the throttle it dies, like it's got no map to use.
Have tried the stock one, burgers22's one that he posted on Geek'd and tscomp's map that he ran On GSRvR's at the start.
Obviously changed injector scaling and latency voltages to the stock settings in 9055.
Do you change any MAF scalings Burnzy? I know where you're coming from though, it idles a touch rough for a second or two and soon as I touch the throttle it dies, like it's got no map to use.
maybe you have valet mode on? have you put the valet limit all the way up.
are you able to log the car for those few seconds?
