TephraMod V7
#2866
Evolving Member
iTrader: (27)
Can someone help me????
I have problems with cruising knocks. Sometimes up to 30 knocks. Start knocking from a low rpm 2000-2500 rpm and keep on knocking until i let go the gas pedal. My tuner dont understand y. I did everything, put my grimmspeed boost controller on a foam wrap so the knock sensor wont feel it. Also have check in the engine for any vibrating.
Is there anyone have this problems???
I have problems with cruising knocks. Sometimes up to 30 knocks. Start knocking from a low rpm 2000-2500 rpm and keep on knocking until i let go the gas pedal. My tuner dont understand y. I did everything, put my grimmspeed boost controller on a foam wrap so the knock sensor wont feel it. Also have check in the engine for any vibrating.
Is there anyone have this problems???
#2867
Evolved Member
iTrader: (27)
Can someone help me????
I have problems with cruising knocks. Sometimes up to 30 knocks. Start knocking from a low rpm 2000-2500 rpm and keep on knocking until i let go the gas pedal. My tuner dont understand y. I did everything, put my grimmspeed boost controller on a foam wrap so the knock sensor wont feel it. Also have check in the engine for any vibrating.
Is there anyone have this problems???
I have problems with cruising knocks. Sometimes up to 30 knocks. Start knocking from a low rpm 2000-2500 rpm and keep on knocking until i let go the gas pedal. My tuner dont understand y. I did everything, put my grimmspeed boost controller on a foam wrap so the knock sensor wont feel it. Also have check in the engine for any vibrating.
Is there anyone have this problems???
If it is a bunch of small numbers adding up then I would say it is probably real knock. If it just spikes to 30 then you need to check the knock sensor to make sure it is not unscrewing itself or that the downpipe is not rattling against the underbody such as the sway bar and cross member bars.
Last edited by evo8426; Mar 27, 2013 at 08:02 AM.
#2868
90550001 v7
Hi Guys,
I am not sure if you can help, I have sent a donation to the legendary Tephra, and asked to see if he can send me the MAF and SD version of 90550701 V7 rom.
Can anyone contact him to see if he has the donation and see if he can help me?
I am not sure if you can help, I have sent a donation to the legendary Tephra, and asked to see if he can send me the MAF and SD version of 90550701 V7 rom.
Can anyone contact him to see if he has the donation and see if he can help me?
#2869
you can check paypal to see if he has accepted the donation.
i know a few people that have donated to tephra and never got a repsonse, myself included.
not happy, but he has taken the money already so not uch i can do anymore.
cheers
i know a few people that have donated to tephra and never got a repsonse, myself included.
not happy, but he has taken the money already so not uch i can do anymore.
cheers
#2870
Newbie
iTrader: (1)
Ok, well I attempted to do some research on my problem. Possibly I just missed it? Anyway, I recently switched over 96530706 from 96940011, 05 usdm and ever since I switched my car has been throwing the p0505 of doom. I read while searching around that it is one of the tables for my ISCV, but I have no idea which one needs to be corrected. As I said, I could have possibly missed the answer, but if anyone has this knowledge off hand please help lol
Last edited by JD Ashley; Mar 28, 2013 at 01:19 AM. Reason: added what rom I switched to
#2871
Newbie
Join Date: Oct 2012
Location: Trinidad & Tobago
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyway else to get these files?
#2873
But a silly question, can a EVO 8 rom be used on EVO 7?
Happy Easter guys!!
#2874
Evolving Member
iTrader: (27)
It spikes to 30 or there are a bunch of 1,2 and 3's which adds up to 30?
If it is a bunch of small numbers adding up then I would say it is probably real knock. If it just spikes to 30 then you need to check the knock sensor to make sure it is not unscrewing itself or that the downpipe is not rattling against the underbody such as the sway bar and cross member bars.
If it is a bunch of small numbers adding up then I would say it is probably real knock. If it just spikes to 30 then you need to check the knock sensor to make sure it is not unscrewing itself or that the downpipe is not rattling against the underbody such as the sway bar and cross member bars.
I have read about this problems for awhile but no luck yet.
Please help anyone!!!!!
#2875
Emailed tephra for the v7 90550001. No reply. Been few weeks now. Am not a Mapper but would like to start on my car soon. I haven't donated yet. I will donate once I have recieved a reply.
#2877
Evolved Member
iTrader: (14)
It 25-30 just between 2200-3500 rpm. Not 1+3+2 knocks. It knocks to 30 knocks at that low rpm until i let go of the gas. This is call cruising knocks for some forum member. I did check to see if the sensor is lose but its not and the downpipe isnt touching the frame either.
I have read about this problems for awhile but no luck yet.
Please help anyone!!!!!
I have read about this problems for awhile but no luck yet.
Please help anyone!!!!!
#2878
I've got a problem switching to sd I'm hoping someone can help with. I had v7 before running fine, I installed a omni 4 bar, and a gm iat and moved all my maps over to the sd rom and my car will start for a very short amount of time, then it dies. It does not run long enough for my wide band to pick up so I'm not sure if its lean or rich. And if I give the car any gas it dies right away like I turned the key off, and wont even try to start if I have my foot on the gas at all. can some one help me get it running?
#2879
Newbie
iTrader: (1)
Ok, well I attempted to do some research on my problem. Possibly I just missed it? Anyway, I recently switched over 96530706 from 96940011, 05 usdm and ever since I switched my car has been throwing the p0505 of doom. I read while searching around that it is one of the tables for my ISCV, but I have no idea which one needs to be corrected. As I said, I could have possibly missed the answer, but if anyone has this knowledge off hand please help lol
#2880
Newbie
Join Date: Oct 2012
Location: Trinidad & Tobago
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I have a question guys....
I am using the 90550001 v7 map (stilll on MAF) the car is doing 478awhp and 473awhp @28 psi on 93 octane. The car is hitting 402 load.
My question is
Is there any way to re-scale my load to 450 or more? Currently at 97% on ID1000cc injectors. Planning on upgrading to 2200 ID. The plan is to switch to c16 and up the boost to 35-40 psi.
I know I will maybe max out the airflow. There is no SD maps for version that I am using.
The stock ECU work perfectly and want to continue using it. If someone can create one for me I am willing to pay for their services
Thanks in advance
I am using the 90550001 v7 map (stilll on MAF) the car is doing 478awhp and 473awhp @28 psi on 93 octane. The car is hitting 402 load.
My question is
Is there any way to re-scale my load to 450 or more? Currently at 97% on ID1000cc injectors. Planning on upgrading to 2200 ID. The plan is to switch to c16 and up the boost to 35-40 psi.
I know I will maybe max out the airflow. There is no SD maps for version that I am using.
The stock ECU work perfectly and want to continue using it. If someone can create one for me I am willing to pay for their services
Thanks in advance