Notices
ECU Flash

wastegate duty deactivation RPM doesn't work?

Thread Tools
 
Search this Thread
 
Old Nov 1, 2009 | 08:09 AM
  #1  
KevinD's Avatar
Thread Starter
Former Sponsor
iTrader: (56)
 
Joined: Sep 2004
Posts: 2,701
Likes: 0
From: DFW, TX
wastegate duty deactivation RPM doesn't work?

hey guys, i haven't seem to have this problem on evo 9's but on our time attack car revving it out to 8500 with the big turbo we can't have the duty cycle running up to 100% after the normal 7500rpm deactivation rpm.

i adjusted the set point to 8500 rpm, but it didn't make a difference. once it revs above 7500 the boost would spike well into the high 30's. is my rom incorrect? it is the 94170008 rom. we may be going to the V7 rom with the big maps, but i want to be sure it doesn't do the same thing.

thanks guy! i can provide any information needed.
Reply
Old Nov 1, 2009 | 12:48 PM
  #2  
fostytou's Avatar
EvoM Community Team
iTrader: (15)
 
Joined: Sep 2006
Posts: 3,143
Likes: 7
From: Aurora, IL
Just go to the V7 maps anyway...
Reply
Old Nov 1, 2009 | 01:54 PM
  #3  
recompile's Avatar
Evolved Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 1,745
Likes: 10
From: New Hampshire, USA
That's when VTEC kicks in
Reply
Old Nov 1, 2009 | 10:45 PM
  #4  
GST Motorsports's Avatar
Account Disabled
iTrader: (8)
 
Joined: Sep 2007
Posts: 3,366
Likes: 2
From: Hayward
You have the incorrect rom def for that table.

It works, just the wrong def.
Reply
Old Nov 2, 2009 | 02:33 PM
  #5  
KevinD's Avatar
Thread Starter
Former Sponsor
iTrader: (56)
 
Joined: Sep 2004
Posts: 2,701
Likes: 0
From: DFW, TX
Is there an updated rom definition? Or at least the correct address for it (I can change it in the XML)? Sorry I'm not a software guy

I presume 94170015 is correct then? I could just switch over to that rom easily before we setup the v7 bigtable tune.
Reply
Old Nov 2, 2009 | 04:46 PM
  #6  
GST Motorsports's Avatar
Account Disabled
iTrader: (8)
 
Joined: Sep 2007
Posts: 3,366
Likes: 2
From: Hayward
Originally Posted by KevinD
Is there an updated rom definition? Or at least the correct address for it (I can change it in the XML)? Sorry I'm not a software guy

I presume 94170015 is correct then? I could just switch over to that rom easily before we setup the v7 bigtable tune.
Same addy for 94170015

Address should be 1a68 instead of 1668
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Buschur
Vendor Announcements
114
Aug 1, 2017 02:29 PM
roidz3
Evo X Engine / Turbo / Drivetrain
9
Jan 11, 2017 01:27 PM
r34p3rex
Evo X Engine / Turbo / Drivetrain
7
Aug 17, 2013 07:22 PM




All times are GMT -7. The time now is 10:41 AM.