What formula are u using? What rom version? If 3a doesn't work try 11 or 9

 

Please pm me a price. Very interested

 

Hi my rom is a 96533706, and the formula is just x as in degC, i've also just noticed the manifold air temperature at 09 so i'll try that as well,

thanks
Andy

 

I'm also interested in a price, if available.

 

i've got it logging mut09 now and its logging 94degC (this was 24degc on maf) any suggestions? do i need to do some scaling with it?

i think i've found the my problem in my in my scalings in my rom

thanks
andy

 

Matt please add me to the waiting list (cpoku@yahoo.com)

 

mine is all up and working now

 

have you got all your ve set up too And ?

 

close i'm still logging to make sure I get it spot on, altough at the moment I'm also getting strange temp values in evoscan but thats probably a forumla thing, car is smooth when driving though

 

Add me to the list

 

1. stikiller214 Dadon6985@yahoo.com
2. Murderedevo256 jjones256@hotmail.com
3. Dyrexion merchantmael@gmail.com
4. Positron julius@teknagen.com
5. Skylineracer skylineracer@gmail.com
6. Monochrome monochrome@w3si.org
7. Joemflsxe joe.j.mckinney@gmail.com
8. Socalredline socalredline@gmail.com
9. And shaw__andy@hotmail.com
10. kyle slowixrs@aol.com
11. c-los clos03z@yahoo.com
12. Dorikun Chefeval@hotmail.com
13. ROGERV boosted8@***.net
14. k20turbo tturbo18@gmail.com
15. jdmevoboost kenrickwong7@gmail.com
16. Mike01gsr Michael.Savannah@gmail.com
17. SuPeRNeT pantool@comcast.net
18. cul8tr nice22066@aol.com
19. WHTEVO WHTEVO@Gmail.com
20. justboosted02 ct9atuner@gmail.com
21. commodude23 acosta25u@yahoo.com
22. jdmEviL8 crxboy101@yahoo.com
23. ohhgyeahfasho mysh0rtscreename@gmail.com
24. forgedevo straightdippin@aim.com

 

Hey guys. I'm back making these again. About 1/4 of the way through the batch. Got new motivation after SD'ing my car. Works wonderful so far with the cable!

Been putting a lot of time into making up a signal buffer for the ECU and have FINALLY finished it. The stock MAP will be the baro input. Few questions:

Is a baro even needed anymore? How are the high -> low altitude guys coming along?

Now that the gruntwork is done I need a hand modifying the SD code to accept a Baro signal and get it scaled to the same as the stock MAP sensor. mrfred is real busy so I am hoping others can lend a hand. I'm running the Phenem ROM.

 

Your best bet would be tephra as far as code is concerned. The baro mirroring the map would obviously bench testing voltage vs density

 

I haven't even bothered with SD until the baro issue can get figured out. I was wondering if anyone had found a suitable option for this?

 

I was just asking the same question over on coloradoevo. It seems as though no one really at altitude, atleast in the Colorado area, has made the switch to SD due to driveability concerns and lack of a barometric compensation.