FIC 2150 Speed Den. Base Map?
#1
Evolving Member
Thread Starter
iTrader: (26)
Join Date: Apr 2010
Location: Starkville
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
FIC 2150 Speed Den. Base Map?
So my 2004 evo's EMS just took a dump. I'm going to try to go back to the stock ecu. I've been doing a ton of reading and I think I'm going to use the TephraMod with SD (I don't know if my AEM 5 bar will work)
If anyone would be willing to give me a basemap I would really really really really appreciate it
I have a
2.4L
FIC2150
FP3794
FP5R cams
AEM5BAr Map sensor (may have to change???)
I know this is asking allot, but any help would be really awesome.
If anyone would be willing to give me a basemap I would really really really really appreciate it
I have a
2.4L
FIC2150
FP3794
FP5R cams
AEM5BAr Map sensor (may have to change???)
I know this is asking allot, but any help would be really awesome.
#3
iTrader: (10)
Call AWDPerformance and ask for diiirk, I helped him tune their drag evo on this very setup. Here's some links to get you started:
https://www.evolutionm.net/forums/ec...ched-roms.html
https://www.evolutionm.net/forums/ec...sdm-8-9-a.html
Using the above two links (and anything linked from them) you should be able to get the car at least running and idling good, as long as you have some good latancy & scaling values for the 2150's. Might need to lower the minimum IPW as well.
TONS more links and references here, start reading and ask if you have any questions!
https://www.evolutionm.net/forums/ec...ead-links.html
https://www.evolutionm.net/forums/ec...ched-roms.html
https://www.evolutionm.net/forums/ec...sdm-8-9-a.html
Using the above two links (and anything linked from them) you should be able to get the car at least running and idling good, as long as you have some good latancy & scaling values for the 2150's. Might need to lower the minimum IPW as well.
TONS more links and references here, start reading and ask if you have any questions!
https://www.evolutionm.net/forums/ec...ead-links.html
#6
Evolved Member
iTrader: (28)
Companies make the map sensor adapter boss.
http://www.vividracing.com/catalog/f...-p-114424.html
http://magnusmotorsports.com/product...ap-sensor-boss
The map sensor just bolts in, run a vac hose, zip tie it up to something (the Magnus one can be welded to a manifold if you have someone that can do aluminum).
http://www.vividracing.com/catalog/f...-p-114424.html
http://magnusmotorsports.com/product...ap-sensor-boss
The map sensor just bolts in, run a vac hose, zip tie it up to something (the Magnus one can be welded to a manifold if you have someone that can do aluminum).
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (26)
Join Date: Apr 2010
Location: Starkville
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Call AWDPerformance and ask for diiirk, I helped him tune their drag evo on this very setup. Here's some links to get you started:
https://www.evolutionm.net/forums/ec...ched-roms.html
https://www.evolutionm.net/forums/ec...sdm-8-9-a.html
Using the above two links (and anything linked from them) you should be able to get the car at least running and idling good, as long as you have some good latancy & scaling values for the 2150's. Might need to lower the minimum IPW as well.
TONS more links and references here, start reading and ask if you have any questions!
https://www.evolutionm.net/forums/ec...ead-links.html
https://www.evolutionm.net/forums/ec...ched-roms.html
https://www.evolutionm.net/forums/ec...sdm-8-9-a.html
Using the above two links (and anything linked from them) you should be able to get the car at least running and idling good, as long as you have some good latancy & scaling values for the 2150's. Might need to lower the minimum IPW as well.
TONS more links and references here, start reading and ask if you have any questions!
https://www.evolutionm.net/forums/ec...ead-links.html
Last edited by benderrodriguez; Aug 9, 2011 at 10:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
chiquita
For Sale - Miscellaneous Automotive
3
Jul 19, 2005 08:46 AM
RyanM
Private 'Evo 1 - 9' For Sale / Wanted
5
Oct 28, 2004 10:08 PM