I have excel 2010, after I activate the content, it comes up with a compilation error for 64 bit. It says the code must be adjusted to work with 64 bit, adjust them and mark them with PtrSafe. That is the message.

 

screenshot

 

Could you try this one please?
https://docs.google.com/open?id=0B9V...zBubWEwT3NMQkE

 

thanks a lot it is working now.

 

Yes but not 100%, I'll update soon

 

is there any way that i can modify the excel to function with basic viii maps? still running on my stock rom. I'm pretty sh**ty with excel and still really want to utilize this awesome tool that you have created

 

It's possible to modify it but serously it would be quicker to use a tephra ROM with all features turned off. Why are you still with the small maps?

Quite simple to convert to tephra V7: https://www.evolutionm.net/forums/ev...hramod-v7.html

 

I swapped everything over a week ago or so, and my baby was running like ****, didn't really have time to try and figure out why besides double checking that i had swapped all my maps over properly

 

many of us have modified/rescaled load/rpm maps
will the program still work well with them ?

 

Yes the Map tracer takes in account the scaling.

As for the AFR Tuner tab, it has no effect on it, and this is not needed because it doesn't need the scaling for calculation.

 

i'll be using this as some problems with my Tephra v7 has forced me to full time open loop.

just to figure out how to integrate the cruising loads into my fuel map smoothly

 

great, it will make things more simple. I run myself full time open loop because I have a blown front O2 sensor that I didn't have time to replace.
I attached my fuel map in the cruise area, as an example.

 

Looks about right. I'm now dialing in mine with id1000.

What target afr do you use in that cruise?

 

About 15.5

 

I've tried running full time open loop but my injectors don't go into decel when I let off, the car doesn't really rev hang really, just stays at wot afr for some reason. Not sure if this has been addressed and I missed it or what.