p0141 impossible to clear
#1
Newbie
Thread Starter
p0141 impossible to clear
hi i have the tephra rom 88583714 on my evo9.I cant clear the rear o2 error code
i tried all way to clear the engine error code but isn't working:
on tephra mods "enable rear o2 simulator"
changed periphery2 into 89D9
could be a rom issue?
thanks
i tried all way to clear the engine error code but isn't working:
on tephra mods "enable rear o2 simulator"
changed periphery2 into 89D9
could be a rom issue?
thanks
#2
Newbie
Thread Starter
nobody ?
I found this table what work on 88580714 and 88580014.I would like to add it to my rom and try if work but I dont know which xml file modify and how to copy paste it into..
<table name="Heater CEL" category="Rear O2" address="2E9F1" type="2D" level="2" scaling="blobbits">
<table name="Bit values" type="Static Y Axis" flipy="true" elements="8">
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>Rear Heater CEL Enable</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
</table>
</table>
thank you
I found this table what work on 88580714 and 88580014.I would like to add it to my rom and try if work but I dont know which xml file modify and how to copy paste it into..
<table name="Heater CEL" category="Rear O2" address="2E9F1" type="2D" level="2" scaling="blobbits">
<table name="Bit values" type="Static Y Axis" flipy="true" elements="8">
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>Rear Heater CEL Enable</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
</table>
</table>
thank you
#4
Also look at the last post here: https://www.evolutionm.net/forums/ec...d-you-use.html
#5
Newbie
Thread Starter
EDIT
ok I did it adding the new part on the XML
<table name="Heater CEL" category="Rear O2" address="2E9F1" type="2D" level="2" scaling="blobbits">
<table name="Bit values" type="Static Y Axis" flipy="true" elements="8">
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>Rear Heater CEL Enable</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
</table>
</table>
In tephramods I enabled ( 1 ) "Flash CEL on Knock "
will be still working after the changing the Rear Heater CEL Enable?
thanks
ok I did it adding the new part on the XML
<table name="Heater CEL" category="Rear O2" address="2E9F1" type="2D" level="2" scaling="blobbits">
<table name="Bit values" type="Static Y Axis" flipy="true" elements="8">
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
<data>Rear Heater CEL Enable</data>
<data>N/A</data>
<data>N/A</data>
<data>N/A</data>
</table>
</table>
In tephramods I enabled ( 1 ) "Flash CEL on Knock "
will be still working after the changing the Rear Heater CEL Enable?
thanks
Last edited by besk; Jan 20, 2017 at 02:38 AM.
The following users liked this post:
besk (Jan 24, 2017)
Thread
Thread Starter
Forum
Replies
Last Post