EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

Speed Density Questions Rom 96531706

Thread Tools
 
Search this Thread
 
Old Jul 28, 2017 | 10:24 AM
Share
  #16  
mines5's Avatar
mines5
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2010
Posts: 870
Likes: 23
From: Streets of willow
Good Question.

you are logging KPA -- for example . your AFR is 10.9 at 80 kpa.

After 60 kpa you only have 101 kpa. Where will you adjust the fueling ?
Reply
0
Old Jul 28, 2017 | 10:33 AM
Share
  #17  
4b11slayer's Avatar
4b11slayer
Thread Starter
Evolved Member
 
Joined: Nov 2015
Posts: 1,787
Likes: 89
From: Santa Ana
Originally Posted by mines5
Good Question.

you are logging KPA -- for example . your AFR is 10.9 at 80 kpa.

After 60 kpa you only have 101 kpa. Where will you adjust the fueling ?

So I would convert the 100 kpa section to 80 kpa? and adjust load accordingly?
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Speed density extreme lean condition when starting off from a stop (9653 V7 SD rom)
Slo_crx1
ECU Flash
54
Aug 25, 2015 07:06 PM
Lean at Cold start on Speed Density w/ 9417 rom
HornstarBU
ECU Flash
20
Mar 24, 2015 02:25 PM
96531706 speed density questions
drifterific
ECU Flash
16
Aug 27, 2010 10:59 PM
96531706 SD & direct boost, JDM MAP sensor upgrading to OmniPower 4bar questions
scheides
ECU Flash
9
Dec 22, 2009 06:06 PM
Back to Subforum
ECU Flash
View Next Unread
Closed loop breaking up




Advanced Search

All times are GMT -7. The time now is 07:40 PM.