obd force patch for ROM 59590004

Reply Subscribe

Thread Tools

Search this Thread

Feb 12, 2018 | 12:04 PM

BCOZEVO

Thread Starter

Evolving Member

iTrader: (2)

Joined: Apr 2007

Posts: 307

Likes: 1

From: OC - SoCal

obd force patch for ROM 59590004

Hey everyone,
I posted this in the general section but figured I would put it here in case anyone needed it. This is CONFIRMED to work.

OBD patch ROM 59590004

Code:

<table name="Non-Continuous Monitor Completion Patch 1 0xA0BD->0x6000" address="91224" category="OBD Inspection" type="1D" level="2" scaling="Hex16"/>

  <table name="Non-Continuous Monitor Completion Patch 2 0x87C2->0x7000" address="91226" category="OBD Inspection" type="1D" level="2" scaling="Hex16"/>

  <table name="Monitor Available(1)/Not Available(0) - Read Only, Do NOT Change" address="01950" category="OBD Inspection" type="2D" level="2" scaling="blobbits">
    <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" elements="8">
      <data>EGR system</data>
      <data>Oxygen heater sensor</data>
      <data>Oxygen sensor</data>
      <data>A/C system refrigerant</data>
      <data>Secondary air system</data>
      <data>Evaporative system</data>
      <data>Heated catalyst</data>
      <data>Catalyst</data>
    </table>
  </table>

  <table name="Monitor Passed(1)/Failed(0) - Read Only, Do NOT Change" address="91225" category="OBD Inspection" type="2D" level="2" scaling="blobbits">
    <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" elements="8">
      <data>EGR system</data>
      <data>Oxygen heater sensor</data>
      <data>Oxygen sensor</data>
      <data>A/C system refrigerant</data>
      <data>Secondary air system</data>
      <data>Evaporative system</data>
      <data>Heated catalyst</data>
      <data>Catalyst</data>
    </table>
  </table>

Enjoy!