EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

Patch: Force OBD Inspection Pass (acamus, mrfred)

Thread Tools
 
Search this Thread
 
Old Jul 18, 2009 | 08:28 AM
Share
  #1  
recompile's Avatar
recompile
Thread Starter
Evolved Member
iTrader: (38)
 
Joined: Nov 2006
Posts: 1,745
Likes: 10
From: New Hampshire, USA
Patch: Force OBD Inspection Pass (acamus, mrfred)
I thought I'd give this patch it's own thread, and organize it nicely. Thank you acamus and mrfred for your work on this.

Disclaimer: This patch is for educational and testing purposes only, and not meant for use on public roads. Be aware that applying this patch on a vehicle that is intended to be inspected by the DMV could be illegal and/or arouse suspicision, especially since this patch can allow you to set the heated catalyst, secondary air monitor or a/c moniter to available/pass even though the car doesn't have it.

Video Tutorial: http://offsite.rallyevo.com/Videos/2...cuflash_06.wmv

This is the patch that will set all inspection tests to "Pass". Acamus has dedicated this patch to Tephra, who could use your donation support. If you enjoy the educational benefit of this patch, please donate.

Originally Posted by tephra

Lastly I have been accepting donations for my work, if you like it or get good use out of it please feel free to paypal whatever you can afford to donations@globalshare.net

Cheers
D.
88590015

PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="3a90c" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="3a922" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="3a928" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>3A928</data>
            <data>3A92A</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@3a928 DA66 -> EAFF
@3A92A 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
from 4019 to E000

Non-Continuous Monitor Availability Patch Part 2
from 6AA1 to EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="3a923" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="3a929" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>


96530006

PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="34C4E" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="34CCE" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="34CD4" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>34CD4</data>
            <data>34CD6</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@34CD4 DA57 -> EAFF
@34CD6 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
from 4019 to E000

Non-Continuous Monitor Availability Patch Part 2
from 6AA1 to EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="34CCF" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="34CD5" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>


94170015

PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="36872" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="36888" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="3688E" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>3688E</data>
            <data>36890</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@3688E DA2A -> EAFF
@36890 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
@36872 4019 -> E000

Non-Continuous Monitor Availability Patch Part 2
@36888 6AA1 -> EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="36889" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="3688F" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>


96940011

PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="39E24" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="39E4E" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="39E54" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>39E54</data>
            <data>39E56</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@39E54 DA66 -> EAFF
@39E56 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
@39E24 4019 -> E000

Non-Continuous Monitor Availability Patch Part 2
@39E4E 6AA1 -> EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="39E4F" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="39E55" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>
94170008

PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="3677a" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="36790" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="36796" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>36796 </data>
            <data>36798</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@36796 DA2A -> EAFF
@36798 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
from 4019 to E000

Non-Continuous Monitor Availability Patch Part 2
from 6AA1 to EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="36791" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="36797" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

MR Turco update - 4/29/10
99860002
PHP Code:
    <table name="Non-Continuous Monitor Availability Patch Part 1" category="OBD Inspection" address="2f620" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Availability Patch Part 2" category="OBD Inspection" address="2f666" type="1D" level="1" scaling="Hex16"/>

    <table name="Non-Continuous Monitor Completion Patch" category="OBD Inspection" address="2f66c" type="2D" level="1" scaling="Hex16">
        <table type="Static Y Axis" elements="2">
            <data>2F66C</data>
            <data>2F66E</data>
        </table>
    </table>
Non-Continuous Monitor Completion Patch
@2F66C DA51 -> EAFF
@2F66E 6AA1 -> 6AA7

Non-Continuous Monitor Availability Patch Part 1
from 4019 to E000

Non-Continuous Monitor Availability Patch Part 2
from 6AA1 to EAFF

PHP Code:
    <table name="Monitor Available(1)/Not Available(0)" category="OBD Inspection" address="2f667" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Availability Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>

    <table name="Monitor Passed(1)/Failed(0)" category="OBD Inspection" address="2f66d" type="2D" level="2" scaling="blobbits">
        <table name="Non-Continuous Monitor Completion Bits" type="Static Y Axis" flipy="true" elements="8">
            <data>EGR system</data>
            <data>Oxygen heater sensor</data>
            <data>Oxygen sensor</data>
            <data>A/C system refrigerant</data>
            <data>Secondary air system</data>
            <data>Evaporative system</data>
            <data>Heated catalyst</data>
            <data>Catalyst</data>
        </table>
    </table>
Last edited by recompile; May 11, 2010 at 06:42 AM.
Reply
0
Old Jul 18, 2009 | 10:49 AM
Share
  #2  
inco9nito99's Avatar
inco9nito99
Evolved Member
iTrader: (90)
 
Joined: Jul 2005
Posts: 1,917
Likes: 0
From: Roselle, IL
Great work Christian, thanks for making it public and spending time sharing the videos .
Reply
0
Old Jul 18, 2009 | 11:09 AM
Share
  #3  
ohhgyeahfasho's Avatar
ohhgyeahfasho
Evolving Member
iTrader: (14)
 
Joined: Oct 2006
Posts: 179
Likes: 0
From: Los Angeles, CA
mind me asking what is the main purpose of this patch? is this for smog/state ref? :P
Reply
0
Old Jul 18, 2009 | 11:26 AM
Share
  #4  
LostSolVTEC's Avatar
LostSolVTEC
Evolving Member
iTrader: (3)
 
Joined: Jan 2004
Posts: 163
Likes: 0
Amazing work everyone that was involved. Will this be something I can add on even after changing the bits to remove my EGR/EVAP/FPR?
Reply
0
Old Jul 18, 2009 | 11:52 AM
Share
  #5  
acamus's Avatar
acamus
Evolved Member
 
Joined: Mar 2008
Posts: 730
Likes: 3
From: Lattitude 48.38°, Longitude 17.58°, Altitude 146m = Slovakia, for common dude
now we need another for heater itself
recompile, I may guide you if you need some help.

Do I smell STICKY here?
Last edited by acamus; Jul 18, 2009 at 11:58 AM.
Reply
0
Old Jul 18, 2009 | 12:01 PM
Share
  #6  
tripperfx3's Avatar
tripperfx3
Evolved Member
iTrader: (6)
 
Joined: Jul 2006
Posts: 1,736
Likes: 0
From: North Beach, MD
Will this work for an VIII? Also I have the rear O2 delete mod and of course with an VIII it wont let me pass emissions. Do I need to remove that?
Reply
0
Old Jul 18, 2009 | 12:38 PM
Share
  #7  
l2r99gst's Avatar
l2r99gst
Evolved Member
iTrader: (2)
 
Joined: Mar 2004
Posts: 3,499
Likes: 4
From: CA
I've been using this for quite a while now on 96530006 and can verify that it passes OBD-II emmissions testing.

Actually, it was pretty funny to see the OBD readiness monitors as passed for items not even on my car.
Reply
0

Trending Topics

Old Jul 18, 2009 | 12:57 PM
Share
  #8  
PeteyTurbo's Avatar
PeteyTurbo
Evolved Member
20 Year Member
iTrader: (9)
 
Joined: May 2004
Posts: 1,581
Likes: 10
From: Philadelphia
I think I can speak for everyone when I say "THANK YOU" to all involved
Reply
0
Old Jul 18, 2009 | 01:09 PM
Share
  #9  
draconx's Avatar
draconx
Evolving Member
iTrader: (6)
 
Joined: Jul 2006
Posts: 303
Likes: 0
this is awesome!!. lol. thanks man.
Reply
0
Old Jul 18, 2009 | 01:58 PM
Share
  #10  
EvolvedGTI's Avatar
EvolvedGTI
Evolving Member
iTrader: (37)
 
Joined: Nov 2005
Posts: 303
Likes: 0
From: Army BCT
Yes, thank you VERY much!
Reply
0
Old Jul 18, 2009 | 01:59 PM
Share
  #11  
Asmodeus6's Avatar
Asmodeus6
Evolved Member
iTrader: (7)
 
Joined: Nov 2006
Posts: 772
Likes: 0
From: Pittsburgh
Absolutely. Greatly appreciate mrfred, acamus' work, and now your tidying up recompile. Patches like these let me rip all the garbage off the car I can't stand.

We are all VERY thankful for your help.
Reply
0
Old Jul 18, 2009 | 03:59 PM
Share
  #12  
4kinboost's Avatar
4kinboost
Evolved Member
iTrader: (10)
 
Joined: May 2005
Posts: 1,055
Likes: 0
From: long island,ny
Originally Posted by Petey Turbo
I think I can speak for everyone when I say "THANK YOU" to all involved
+1,00000000000000000000000000000000000000000000000 00000
Reply
0
Old Jul 18, 2009 | 05:20 PM
Share
  #13  
KleenWhiteMR's Avatar
KleenWhiteMR
Newbie
iTrader: (12)
 
Joined: May 2006
Posts: 48
Likes: 0
From: Denver CO
i tried doing this, step by step as per the video link, and it was easy untill i hit a problem. when im in notepad++ after ive cut and pasted the tables, i go to save and it tells me "save failed" please check if file is open in other programs or something like that. at the time i didnt even have any other programs running. any help would be greatly appriciated.
Reply
0
Old Jul 18, 2009 | 06:04 PM
Share
  #14  
Evoryder's Avatar
Evoryder
Evolved Member
iTrader: (55)
 
Joined: Apr 2004
Posts: 7,383
Likes: 10
From: ☼ Florida ☼
Originally Posted by KleenWhiteMR
i tried doing this, step by step as per the video link, and it was easy untill i hit a problem. when im in notepad++ after ive cut and pasted the tables, i go to save and it tells me "save failed" please check if file is open in other programs or something like that. at the time i didnt even have any other programs running. any help would be greatly appriciated.
just use regular notepad, and make sure you have the patch entered properly. Also ecu flash should be closed.
Reply
0
Old Jul 18, 2009 | 09:37 PM
Share
  #15  
MR. EVO MR's Avatar
MR. EVO MR
Account Disabled
iTrader: (9)
 
Joined: Jan 2005
Posts: 1,761
Likes: 4
From: :noitacoL
are you adding more roms?
i need 94170008
Reply
0



Advanced Search

All times are GMT -7. The time now is 03:10 PM.