Need Some help!!
#1
Newbie
Thread Starter
Join Date: Oct 2004
Location: Sparks, NV
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Missing wire connections on white connector
Today i went to plug in the Tactrix cable and the wires fell out of it! The one black wire is straight through no cuts and it looks like the other two shorter wires were just touching it and held on by zip ties and shrink wrap. Now i cant get my cable to work any one else have this problem or could maybe look at there cable to tell me where the wires go and info is appriciated thanks
Last edited by Evo478; Aug 5, 2006 at 10:35 AM.
#3
EvoM Guru
iTrader: (5)
I don't know offhand, I assume you meant it fell out of the white connector.. If I remember to grab the cable from the shop later I'll take a photo of it and post it if nobody can help out before then..
BTW, I should mention this for all new members, not just you, but its probably best to make your forum topic on a new thread as descriptive as possible and not just "need Some help" it really is too easy to overlook threads if their not descriptive enough..
BTW, I should mention this for all new members, not just you, but its probably best to make your forum topic on a new thread as descriptive as possible and not just "need Some help" it really is too easy to overlook threads if their not descriptive enough..
#4
Newbie
Thread Starter
Join Date: Oct 2004
Location: Sparks, NV
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info yeah there are the three wires that come out of the white connector one goes to the Pink connector and the other two dont look like they were ever hooked to anything clean cuts and no splices anywhere. There were just 2 zip ties and and some shrink wrap holding them on i am getting a message in ecuflash that says - Flashing tools do not recognize falsh method 'mitsukernel'
Thread
Thread Starter
Forum
Replies
Last Post
supersnow
Evo How Tos / Installations
4
May 25, 2016 02:53 PM