gogoevo

wanted to get some ideas here, in evoscan 97 logs i see timing up to 5 degrees more than the highest timing anywhere on my timing maps

heyzeus11

iTrader: (12)

are you comparing the timing values to the timing in the high octane timing map?

gogoevo

yah, but i am seeing timing in the logger and through an obd2 scanner that is well above the highest timing values in my high octane timing map

Ralph

iTrader: (19)

Show us the logs / Timing Map..

Are you modifying the High Octane Timing #2 map?

C6C6CH3vo

iTrader: (9)

What amount is displayed on the log and map that is 5 degrees different. What load, RPM and TPS?

He doesnt have a IX with all those extra uneeded timing maps (JK I'm jealous)

julianc

iTrader: (1)

I have seen the same thing multiple times on my IX as well. I am modifying High Octane Map #2 and the highest number I have in the cells is 38. I have noticed that these "high" timings seem to only occur in closed loop mode during cruise or deceleration so I don't think the ECU is even referring to these maps that are being modified. Here's an excerpt:

RPM Timing TPS LoadCalc
2500 39 19 17
2500 39 19 17
2500 39 19 17
2500 39 19 17
2500 39 19 17
2500 39 19 17
2500 39 19 17
2469 39 19 17
2469 39 19 17
2469 39 19 17
2469 39 19 17
2469 39 19 17
2469 39 19 17
2438 39 19 17
2438 39 19 17
2469 39 19 17
2438 39 19 17
2438 39 19 17
2438 40 19 17
2406 41 21 17
2406 42 21 27
2438 43 21 27
2406 43 21 27
2406 42 21 27
2406 42 21 27
2406 40 21 27
2406 40 22 27
2406 40 23 33
2406 40 24 37