New EVODROID7 EvoScan Android GPS/Logger/Reflashing CarPC Touchscreen Review
#32
Evolved Member
Pre-ordered. Screwed up and forgot to add the 1.3 cable in the order. Blast!
#34
iphones are for p**sies who never give a damn about the tech and want to look geeky.
i want an apk, got too many android devices lying around already. will it work with bluetooth/wifi obd2 dongle and which one i'd need?
i want an apk, got too many android devices lying around already. will it work with bluetooth/wifi obd2 dongle and which one i'd need?
#35
Evolved Member
iTrader: (15)
Join Date: Feb 2006
Location: Effingham, IL
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
Ok, it's late and I prolly just didn't read close enough.. so I already have the openport 1.3u cable and an android tablet and a galaxy s3..
Can I use any of these? or would I still need to buy your tablet and extra cable?
Can I use any of these? or would I still need to buy your tablet and extra cable?
#36
Evolving Member
Join Date: May 2007
Location: Europe
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#39
Is the evodroid compatible with Subarus? If not, any plans to add compatibility in the future?
Also, is there any way to connect the DLP IO8 to this?
Also, is there any way to connect the DLP IO8 to this?
Last edited by imAnooblikeU; Nov 4, 2012 at 02:05 AM.
#40
there is no such thing as an "external ADC cable", I think you are referring to the openport 1.3DA or openport 3.0DA cable which both have 4x ADC 0-5v input channels.
and yes you can use it as a straight 4 channel ADC datalogger if you like using either of the Openport 1.3DA or 3.0DA cables. but you will need to get power to the device through the OBDII port though, for example pin16(12v +) and pin4(-ve) on openport obd connect need to be powered.
if you give me more details on what you are trying to log with the ADC and are you running this for an EvoX or Evo7/8/9 perhaps? I can give you more specific ideas.
#41
yes it works on any resolution, the existing gauge designer program still works, so you can edit any design you like for any resolution. it outputs a txt file with the resolution in the filename, for example 800x480_Carbon1.txt and 480x800_Carbon1.txt and you can have any background image filename you like.
#43
you don't need the DLP-IO8 because it is an all in one solution now, which means you can use the new openport cable in place of the dlp-io8
the EvoScan Openport 1.3DA and 3.0DA has 6 connections, 4 for external devices... 1 for sensor/serial ground (negative) and 5v for powering certain sensors than need 5volts.
1. ADC (0-5v Sensor input) also works as a switch input or switch output.
2. ADC (0-5v Sensor input) also works as a switch input or switch output.
3. ADC (0-5v Sensor input) also works as a switch input or switch output.
4. ADC (0-5v Sensor input) also works as a switch input or switch output.
any of the above 4 can also be used for Serial Input from a Wideband, up to a maximum of 4 widebands connected at once.
5. Ground (for Sensors and Serial Wideband input)
6. 5v Power for powered sensors.