Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

New Evo Owner w/ Baseline Numbers

Thread Tools
 
Search this Thread
 
Old Jul 19, 2009 | 10:51 PM
  #31  
Brent kuz's Avatar
Evolving Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 104
Likes: 0
From: Rhode Island
Great numbers for being so stock! I like seeing what the stock block can do in these cars. It is insane.
Reply
Old Jul 19, 2009 | 11:32 PM
  #32  
GHOSTN's Avatar
Evolving Member
 
Joined: Jul 2006
Posts: 100
Likes: 0
From: New Zealand
Originally Posted by godnf8
Buschur 3" TBE On Car but no dyno update yet.

Have Full-Race ProStock exhaust manifold, hallman pro rx mbc, lc-1 wideband, boost gauge, and 255lph fuel pump sitting at the house

ets 4" widetank intercooler and magnus cast aluminum intake manifold will be here this week and new laptop for tuning will be here at end of month.

Will probably put the intercooler, wideband, and intake manifold on car this weekend. Still trying to decide if I want to do a new o2 housing or an o2 dump before I put on the full race manifold.

Will put up some updates when I get to the dyno for tune, might be a couple weeks because i'll be traveling for work soon.
Nice!
what throttle body are you going to use 65mm 75mm? Are you going to run any cams i have herd good things about gsc s2s

sounds good for over 350whp!

Last edited by GHOSTN; Jul 21, 2009 at 12:37 AM. Reason: error
Reply
Old Jul 20, 2009 | 08:11 AM
  #33  
S6devil's Avatar
Evolved Member
iTrader: (10)
 
Joined: Nov 2007
Posts: 1,093
Likes: 0
From: NYC
Originally Posted by Tahoe55
Here's my EVO 8 dyno run from English racing after intake and exhaust mods
Stock turbo, cams, and block.
u got 323/310

great, so its easy to see how the MIVEC helps, and how it takes to tuning. i have a IX, and when i had identical mods and boost as you list (also on the DynoJet), my result was 353/348.

P.S. with 23psi, i pulled 346/338
Reply
Old Jul 20, 2009 | 12:38 PM
  #34  
godnf8's Avatar
Thread Starter
Evolving Member
iTrader: (12)
 
Joined: Apr 2009
Posts: 142
Likes: 0
From: Virginia
Originally Posted by GHOSTN
Nice!
Have you got a pod filter on there? what throttle body are you going to use 65mm 75mm? Are you going to run any cams i have herd good things about gsc s2s

sounds good for over 350whp!
Pod filter? I'll probably run the boomba racing 75mm since I was told it would bolt right up to the magnus intake manifold. Strapped for cash atm because I still need to get coilovers and new tires for the wheels I got so I'm not sure when I'll do the intake manifold/tb combo
Reply
Old Jul 20, 2009 | 06:30 PM
  #35  
Tahoe55's Avatar
Evolving Member
 
Joined: Aug 2007
Posts: 100
Likes: 2
From: Portland, OR
Originally posted by godnF8

Nice numbers man! I can't wait until I get my car tuned.
I just installed the ETS 4" widetank intercooler this weekend
and will hopefully get the lc-1 wideband in this week or weekend
to begin gradual changes before I put the hallman mbc in and up the boost some.

Did you upgrade the injectors or fuel pump?
what boost controller you running?
Any other mods besides intake/exhaust? o2 housing?
My mods are listed in my signature.

I currently have the stock injectors in but will upgrade to bosch 1000s this winter when I start project FP-red. Fuel pump is upgraded. Walbro 255. pretty standard mod. Hallman manual boost controller with the knob inside the car. Makes it real easy to adjust boost. With the Hallman boost control and the MR BOV valve (metal) you can get pretty decent boost out of the stock turbo.

O2 housing is currently stock. I have a Titek one that I'll put in with the FP-red after the fall track season.

Last edited by Tahoe55; Jul 20, 2009 at 06:35 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
godnf8
Evo Show / Shine
17
Jun 14, 2013 03:57 PM
Hudson
For Sale - Part Outs
7
Apr 9, 2012 11:39 AM
godnf8
For Sale - Wheels / Tires
32
Jun 16, 2011 11:07 AM
Iceman5
Evo X Show / Shine
16
Nov 21, 2009 06:58 PM
godnf8
Evo Show / Shine
14
Jul 20, 2009 02:45 PM




All times are GMT -7. The time now is 09:26 AM.