STM's Evo back on the dyno
Thread Starter
Former Sponsor
iTrader: (79)
Joined: Jun 2007
Posts: 2,340
Likes: 5
From: Rochester, NY
STM's Evo back on the dyno
So its been pretty warm out and I'm starting to get the itch! Last week was filled with a bunch of warm days and I decided to take the Evo out for a ride. Well one ride turned into driving it all week. I put 200 miles on it in two days! Not one issue with heat or any thing. I was A little scared at first because of the hard block but we had NO issues at all. So anyhow after driving the car I felt like it was down a little on power so I tossed it back on the dyno and did some pulls which turned into some testing and this is where it ended up.
686WHP and 584 TQ @40 psi

Here is a quick video Shawna put together.
http://www.youtube.com/watch?v=NYqc0QIKthk
Just a quick mod list
STM FF 6262 Kit
Buschur Motor/Head/Cams
Buschur race core
STM IC pipes
DI Intake manifold
TRE trans/ Transfer case/ Max lock rear end
ID2000's
AEM EMS
For more info and pics on the car please check here
http://www.streettunedmotorsports.com/gallery.htm
Enjoy!
-Em
686WHP and 584 TQ @40 psi

Here is a quick video Shawna put together.
http://www.youtube.com/watch?v=NYqc0QIKthk
Just a quick mod list
STM FF 6262 Kit
Buschur Motor/Head/Cams
Buschur race core
STM IC pipes
DI Intake manifold
TRE trans/ Transfer case/ Max lock rear end
ID2000's
AEM EMS
For more info and pics on the car please check here
http://www.streettunedmotorsports.com/gallery.htm
Enjoy!
-Em
Trending Topics
Thread Starter
Former Sponsor
iTrader: (79)
Joined: Jun 2007
Posts: 2,340
Likes: 5
From: Rochester, NY
Thanks Guys!
To keep an Eye on the temps we monitor the oil instead of water in the motor and still use water in the head.
Yes we do drive around with the chute on.
-Em
To keep an Eye on the temps we monitor the oil instead of water in the motor and still use water in the head.
Yes we do drive around with the chute on.
-Em













Keep up the good work Em.

