Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

Evo 8 FP71HTA results 93 octane

Thread Tools
 
Search this Thread
 
Old Oct 21, 2012, 09:09 PM
  #16  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ExViTermini
wayy rich, and laggier than my full setup. What kind of boost are you holding out the top end? You may think about an ecu boost setup

drops to only 26 up top
Old Oct 22, 2012, 10:44 AM
  #17  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Can anyone anwser me on the afr's and how this chart registers AFR's, when he wasn't monitoring AFR's through my LC1?
Old Oct 22, 2012, 11:09 AM
  #18  
Former Sponsor
iTrader: (12)
 
Boosted Tuning's Avatar
 
Join Date: Jun 2005
Location: Chico, CA (Nor-Cal)
Posts: 2,383
Likes: 0
Received 7 Likes on 5 Posts
Originally Posted by korizmo
Can anyone anwser me on the afr's and how this chart registers AFR's, when he wasn't monitoring AFR's through my LC1?
If it wasnt using a wideband, then those are not the actual AFR numbers. He may have been logging AFRMAP, but that is not actual AFR.

Last edited by Boosted Tuning; Oct 22, 2012 at 03:10 PM.
Old Oct 22, 2012, 02:07 PM
  #19  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
ok cause at WOT I see 11.1 on my LC1 and it holds there which is still rich. He probably just tuned me to be very safe and conservative. I did mention that I was nervous about WOT it. Last time I did it the engine went boom.

I'm boost leak testing this weekend and going to check for exhuast leaks.

Last edited by korizmo; Oct 22, 2012 at 02:11 PM.
Old Oct 29, 2012, 11:43 AM
  #20  
Evolving Member
 
JDM EVO 6's Avatar
 
Join Date: Nov 2011
Location: Miami
Posts: 168
Likes: 0
Received 2 Likes on 2 Posts
You should try to get your tuner to lean it out a little and get it to have more torque!

Also those HKS 272 are mild go with GSC S2 or Kelford 272.
Old Oct 29, 2012, 12:16 PM
  #21  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Well some things have been discovered. Cracked header welds on the bottom side of the ports. Thats why i didn't notice any exhaust leaks. Hidden cracks.

Noone ever purchase the Tomioka header. I found about 5-6 leaks at the head and turbo. 650.00 manifold is garbage.


I just sent off my stock header to buschur for the port/coat with all new grimmspeed gaskets This time i'm going to use the copper RTV and seal this thing. I did a boost leak test and everything checked out there all the way to 30psi

Last edited by korizmo; Oct 29, 2012 at 12:18 PM.
Old Nov 4, 2012, 07:09 AM
  #22  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Well I fail epic at boost leak testing. I didnt realize how slow the boost is suppose to fall and I found a major leak that i missed on my lower intercooler pipe and on the back of the throttle body where some allen key plug is?. It's starts to leak really bad at 24-25 psi.


Retune time ahead once all is fixed
Old Nov 4, 2012, 09:03 AM
  #23  
Evolved Member
iTrader: (6)
 
domyz's Avatar
 
Join Date: Jun 2010
Location: Canada
Posts: 878
Received 7 Likes on 6 Posts
Originally Posted by korizmo
Well I fail epic at boost leak testing. I didnt realize how slow the boost is suppose to fall and I found a major leak that i missed on my lower intercooler pipe and on the back of the throttle body where some allen key plug is?. It's starts to leak really bad at 24-25 psi.


Retune time ahead once all is fixed
This is the BISS screw. Are you sure that it isn't the throttle body shaft seals that leaks?
Old Nov 4, 2012, 05:19 PM
  #24  
Evolving Member
Thread Starter
iTrader: (17)
 
korizmo's Avatar
 
Join Date: Nov 2011
Location: Florida
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by domyz
This is the BISS screw. Are you sure that it isn't the throttle body shaft seals that leaks?
i replaced the shaft seals less than 3k miles ago. Those are good to go.

I can put my finger right on the biss screw when i have 30lbs in the system i can directly feel and i can make the leak sound change with finger pressure. its definitely coming from that
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mda56
E85 / Ethanol
69
Jul 5, 2017 07:52 PM
Freddy302
Evo Engine / Turbo / Drivetrain
66
Dec 25, 2016 09:49 PM
mda56
General Engine Management / Tuning Forum
15
Mar 30, 2016 12:33 PM
picco97
For Sale - Part Outs
34
Jan 22, 2014 02:32 PM
GregGSC
Motor Sports
68
Dec 8, 2009 09:18 PM



Quick Reply: Evo 8 FP71HTA results 93 octane



All times are GMT -7. The time now is 02:20 AM.