I have an Evo 8 and mods are tomei arms turbo (26psi) ,750cc injectors, full boltons with cams and a tune. I'm currently at about 340whp. What do I need to wait h over to E85 and what kind of in increase will I be looking at? I was thinking of going with PTE 1200cc injectors.

 

1200 pte injectors should be okay,255lph will max around 400-440 whp,i would go with aeromotive 340 or 320 lph intank.

 

Not to be a dick, but this is the wrong section. Post in engine/turbo/drivetrain.

 

255 should be fine with 1200cc injectors on E85 with the tomei turbo.

 

you should be up 60whp at minimum. and that turbo can make 450-470whp on e85 with correct mods

 

Ppl saying 255 pump can support up to 500hp

 

I was told when going e to get 1200cc Hi Z injectors and a 4 bar map sensor. Obviously the fuel pump is a must as well. This would net around 410whp depending on other supporting mods.

 

I made 530whp with my FP Black and a modded walbro. It was way to lean for safety so we decided 480whp was the max on e85 with a single "modded" wally.

 

that's gasoline, not ethanol. it takes a lot more ethanol by volume compared to gasoline to hit stoich