ForceFed Performance - FP Red 93 Oct.
ForceFed Performance - FP Red 93 Oct.
Hey guys, I just wanted to share my results.
Last year I was tuned by Babi @ Forcefed Performance in Fayettville NC.
At the time my mods were:
APS 3in Exhaust
FIC 1050cc
Spoolin Up COP
Stock Turbo 10.5 Hotside
GSC S2 Cams, Springs, Retainers
Evo 9 Metal BOV
With those mods it made 314/309 at 24 psi.
I recently added:
JB FP Red
Buschur LICP
Buschur UICP
TIAL QR
Buschur Intake
Buschur Ported Exhaust Manifold
Buschur Ported Intake Manifold
Buschur Race FMIC
With this addition I made 432/354 at 26 psi.
(Dyno sheet was the pull before)
I am very pleased with the results, and I just figured I would share.
Last year I was tuned by Babi @ Forcefed Performance in Fayettville NC.
At the time my mods were:
APS 3in Exhaust
FIC 1050cc
Spoolin Up COP
Stock Turbo 10.5 Hotside
GSC S2 Cams, Springs, Retainers
Evo 9 Metal BOV
With those mods it made 314/309 at 24 psi.
I recently added:
JB FP Red
Buschur LICP
Buschur UICP
TIAL QR
Buschur Intake
Buschur Ported Exhaust Manifold
Buschur Ported Intake Manifold
Buschur Race FMIC
With this addition I made 432/354 at 26 psi.
(Dyno sheet was the pull before)
I am very pleased with the results, and I just figured I would share.
Nice power curves! Stock turbo drops off after 6k...Red just keeps climbing! Still not sure what setup I'm gonna go with on my next EVO. FP Turbos are awesome but the wait sucks...
Trending Topics
Evolved Member
iTrader: (13)
Joined: Sep 2011
Posts: 1,288
Likes: 1
From: JacksonvilleNorth Carolina/Central Florida
nice man, Babi is a great tuner. I recently bought an FP Red so I have a few questions for you:
1. What Cams do you have?
2. What Fuel pump(s) do you have?
3. What Injectors do you have?
Reason I ask is since I bought my red I also bought a double pumper 2x255s and some FIC 1450cc injectors and just want to make sure that the double pumper isn't going to be overkill for my JB Red. Just looking for 430-450 hp on their mustang dyno which is really alot of power when you think about it. Cheers, Sean
1. What Cams do you have?
2. What Fuel pump(s) do you have?
3. What Injectors do you have?
Reason I ask is since I bought my red I also bought a double pumper 2x255s and some FIC 1450cc injectors and just want to make sure that the double pumper isn't going to be overkill for my JB Red. Just looking for 430-450 hp on their mustang dyno which is really alot of power when you think about it. Cheers, Sean
nice man, Babi is a great tuner. I recently bought an FP Red so I have a few questions for you:
1. What Cams do you have?
2. What Fuel pump(s) do you have?
3. What Injectors do you have?
Reason I ask is since I bought my red I also bought a double pumper 2x255s and some FIC 1450cc injectors and just want to make sure that the double pumper isn't going to be overkill for my JB Red. Just looking for 430-450 hp on their mustang dyno which is really alot of power when you think about it. Cheers, Sean
1. What Cams do you have?
2. What Fuel pump(s) do you have?
3. What Injectors do you have?
Reason I ask is since I bought my red I also bought a double pumper 2x255s and some FIC 1450cc injectors and just want to make sure that the double pumper isn't going to be overkill for my JB Red. Just looking for 430-450 hp on their mustang dyno which is really alot of power when you think about it. Cheers, Sean
Cams: GSC S2
Fuel Pump: walbro 255 (Single)
Injectors: FIC 1050cc
Thread
Thread Starter
Forum
Replies
Last Post
jlucasgsx
General Engine Management / Tuning Forum
28
Sep 6, 2014 08:25 PM
06redrocket
Vendor Service / Parts / Tuning Review
10
Jul 28, 2011 02:54 PM