Post exact weights of weight reduction you have done!
#618
Haha yea its awesome. I wonder what people think when they buy there flooring back in the 60s. My downstairs is being re modeled and the floor is last to go. I picked up some carpet but I'm not using it until the painting is done and this floor is ripped up.
#620
Evolved Member
iTrader: (8)
More data, good for those few out there interested in creating a kinematic model of the rear suspension.
Everything here is from the rear, one side only. As always, +/-0.2 lbs
Everything here is from the rear, one side only. As always, +/-0.2 lbs
Code:
E-Brake Assembly 5.0 Cable, Back plate, Shoes, Hardware (one side) Hub Carrier 9.4 Carrier and wheel speed sensor Upper Control Arm 4.4 Ball joint nut, no other hardware Toe Control Arm 2.4 Ball joint nut, no other hardware Hub Bearing Assembly 7.4 Axle 13.4 axle nut included Trailing Arm 4.0 Ball joint nut, no other hardware Lower Control Arm 3.6 No hardware
Last edited by 03whitegsr; Jan 11, 2012 at 02:34 PM.
#621
i need help from someone who has a dash in the car. or at least know's what i am asking for.
i can not remember or figure out what these arms hold up or bolt too. i circled what i am asking one of you guys to go to your car and look at. you will need to remove the lower plastic cover ''where your knee's are when your sitting in the car''
i modified mine and im thinking i can just remove them. but i do not remember if there is a need for them.
i can not remember or figure out what these arms hold up or bolt too. i circled what i am asking one of you guys to go to your car and look at. you will need to remove the lower plastic cover ''where your knee's are when your sitting in the car''
i modified mine and im thinking i can just remove them. but i do not remember if there is a need for them.
#626
also while i am here. does anyone know if the evo with AC AND THE EVO rs WITHOUT A/C have the same heater cores? i wonder if the RS heater core is lighter then the evo's who had A/C
#627
Evolved Member
iTrader: (53)
Delete the pieces you have circled.
I removed some misc crap under the hood of the RS I won't ever use again today. The strut tower bracket, A/C line bracket, Air bag brackets and clutch line bracket..........now I have to sad it and paint it where I took the spot welds out, it's way more work than I wanted to do for .9 pounds..............but it is 410 grams and that's a lot! hahahahah
BTW, that is what happens when you drink beer with Curt Brown!
I removed some misc crap under the hood of the RS I won't ever use again today. The strut tower bracket, A/C line bracket, Air bag brackets and clutch line bracket..........now I have to sad it and paint it where I took the spot welds out, it's way more work than I wanted to do for .9 pounds..............but it is 410 grams and that's a lot! hahahahah
BTW, that is what happens when you drink beer with Curt Brown!
#628
Delete the pieces you have circled.
I removed some misc crap under the hood of the RS I won't ever use again today. The strut tower bracket, A/C line bracket, Air bag brackets and clutch line bracket..........now I have to sad it and paint it where I took the spot welds out, it's way more work than I wanted to do for .9 pounds..............but it is 410 grams and that's a lot! hahahahah
BTW, that is what happens when you drink beer with Curt Brown!
I removed some misc crap under the hood of the RS I won't ever use again today. The strut tower bracket, A/C line bracket, Air bag brackets and clutch line bracket..........now I have to sad it and paint it where I took the spot welds out, it's way more work than I wanted to do for .9 pounds..............but it is 410 grams and that's a lot! hahahahah
BTW, that is what happens when you drink beer with Curt Brown!
as for those bits you just removed i am sure that cleaned it up beautifully too.
david did you pull your RS heater core? do you know if the evo's with ac and rs without a/c used the same core's or is the RS lighter. if you removed yours do you want to sell it?
#629
Evolved Member
iTrader: (53)
They have to be the same, all US RS's came with A/C. Are you able to pull the A/C and still have the heater work? If not then I imported the JDM non-A/C stuff for my car so I could keep the heater and delete the A/C like it was suppose to be in the first place. If that's the case I can sell you the same parts I used.
#630
They have to be the same, all US RS's came with A/C. Are you able to pull the A/C and still have the heater work? If not then I imported the JDM non-A/C stuff for my car so I could keep the heater and delete the A/C like it was suppose to be in the first place. If that's the case I can sell you the same parts I used.
i removed the a/c all the way up to the fire wall. after that i do not know what is left. is there a kit on your site i need i can buy?
i removed those brackets. it now weigh's 15.2lbs. my stock bar weighed 20.8lbs. 5.6lbs off the bar. and i still have some extra idea's. i need 2.4 more lbs.