Post Your Custom Sub Enclosure Here!
Thread Starter
Evolving Member
Joined: Sep 2005
Posts: 141
Likes: 0
From: Virginia
Post Your Custom Sub Enclosure Here!
Anybody got any custom Sub Enclosures, post a picture or two here!
Looking for ideas, other than the typical square box in the trunk setup...
Looking for ideas, other than the typical square box in the trunk setup...
ask and you shall recieve
here are the pics of the box out of the car, this is the original box before the mold was pulled so this one is slightly heavier (probably about 15-18lbs) but the duplicates off the mold weigh in at about 10-12 lbs Let me know what you think
EDIT: It does fit a 10" or a 12"
EDIT: It does fit a 10" or a 12"
Last edited by MConsoliA4; Feb 13, 2007 at 06:52 AM.
That looks great. I saw something on Cardomain that i do like. 
I will try to make that for my 10" Type R. If anyone knows the owner of that car please let me know.
This should be a good thread.
Steve
GnV Motorsports
I will try to make that for my 10" Type R. If anyone knows the owner of that car please let me know.
This should be a good thread.
Steve
GnV Motorsports
Thread Starter
Evolving Member
Joined: Sep 2005
Posts: 141
Likes: 0
From: Virginia
here are the pics of the box out of the car, this is the original box before the mold was pulled so this one is slightly heavier (probably about 15-18lbs) but the duplicates off the mold weigh in at about 10-12 lbs Let me know what you think
EDIT: It does fit a 10" or a 12"
EDIT: It does fit a 10" or a 12"
Thanks.
Trending Topics
SpineDoc: PM sent, sorry for slow response
Inprogress: We actually measured the airspace of this box to be exactly 1 cubic foot. Polyfil can be added to compensate if more space is needed though.
Good_Enough: We have pictures somewhere from the vehicle the orginal was made from as soon as i find them i'll post them here
Inprogress: We actually measured the airspace of this box to be exactly 1 cubic foot. Polyfil can be added to compensate if more space is needed though.
Good_Enough: We have pictures somewhere from the vehicle the orginal was made from as soon as i find them i'll post them here
UPDATE:
Alright, finally found the pics of the one-off box we built for the Evo for a 13W1V2. This box IS slightly deeper than the box we have a mold of but it gives you the general idea of where the box sits in the vehicle. (Unfinished too)
Alright, finally found the pics of the one-off box we built for the Evo for a 13W1V2. This box IS slightly deeper than the box we have a mold of but it gives you the general idea of where the box sits in the vehicle. (Unfinished too)
I work for a shop that has a mold for a 100% fiberglass box that sits on the driver's side of the trunk and fits either a 10" or 12" sub. It is color matched to the trunk carpeting to look factory and the fit is un-matched. The enclosure is incredibly light weighing roughly 10lbs without a sub. It is made from industrial grade fiberglass sprayed out of a industrial chop gun. If you're interested i can provide some pics.