fishie36

iTrader: (1)

Does anyone have this that they could share? I am installing a viper 5901 in an 04 GSR.

mressler12

This should work
http://www.the12volt.com/installbay/....asp~TID~64456

Just be sure to meter everything to make sure your getting the right wire. Did you get a directed 556U for the bypass?

fishie36

iTrader: (1)

I just ordered the bypass today... I hope it comes with good instructions because the viper guide does not show how the bypass integrates in the system.

mressler12

If you got the 556 it is integrated through the remote starts status output wire if i remember correctly it would be the blue/white wire on the i think 5 pin harness that has the hood pin, tach, brake, neutral safety switch, and the status output on it.

lilman8403

iTrader: (8)

The 556u or 556uw work great however i used the bypasskit one where i didn't lose a key and it worked great. But mressler is right blue/white wire (- status output)

fishie36

iTrader: (1)

Really? What model did you order? They don't have anything older than the 08 evo on the vehicle finder...

mressler12

Yes, what bypass did you use? I have only heard of using universal bypass units in which you lose a key. Let us know what you used! I want to get one too! Also, did it take 2 keys to program or just 1?

fishie36

iTrader: (1)

Bump

shortdahri

iTrader: (1)

I used a 556u bypass for my 2003 mitsubishi evo 8 and used this car alarm wiring diagram during my install:

http://www.modifiedlife.com/2003-mit...iring-diagram/

fishie36

iTrader: (1)

Did you have to use any relays or extra parts not included with the viper or bypass for your installation?

fishie36

iTrader: (1)

Bump for above question.