are all stock clutch in the evo (03 to 05) made from exedy?

i heard the MR's stock clutch is made by exedy

 

Yes. Exedy makes the OEM clutch for Mitsubishi. They are also OE on the Subaru WRX / STI and *many* other cars.

-M

 

So if we buy the Exedy single plate clutch is it the same ? or stonger you think ?

 

Better Although I Wouldnt Reccomend The Single Disk. Get The Twin Disk.

 

Be prepared for noises w/ a twin disk.

Depending on your power level you might be better suited with a stock type organic disk and a different pressure plate.

ACT, Clutchmasters, RoadRace and a host of others make something like this.

Twin disks allow you to slip more however...

 

Well Exedy makes a number of "Stages" for thei clutches...

Stage 1 - Full Face, Sprung, Organic Disc... good for about a 20% increase in power (Exhaust, Intake)

Stage 2 - 4-Puck, Sprund, Ceremetallic Disc... good for about 60% increase in power (Above mods + MBC)

Stage 3 aka Hyper Single - 6-puch, Sprung, Ceremetallic Disc... Good for about 290WHP (Above mods + cams)

Stage 4 aka Hyper Twin - Twin 6 Puck, Sprung, Ceremetallic Discs... Good for about 400-450WHP

Stage 5 aka Hyper Triple - Three 6 Puck, Unsprung, Ceremetallin Discs... Good for big power 500-600WHP.

After that you step into Carbon Territory... Big power, Light weight, High heat tollerance.

There really is something for everyone, just make sure you talk to others and try to make a decision that best fits YOUR needs and expectations.

-M

 

Yup! Made by Exedy

 

Hmm..interesting, I didn't know they made our clutches. I hope their aftermarket clutches aren't like the stocker cause the stock one blows.

 

here is a good story for you on clutches. if your not going big power, over 400. buy an act.
https://www.evolutionm.net/forums/sh...hreadid=121609