Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

SBR 2.3 GT35R Dyno results

Thread Tools
 
Search this Thread
 
Old Mar 22, 2005 | 10:19 AM
  #1  
SlowboyMR's Avatar
Thread Starter
Former Sponsor
iTrader: (7)
 
Joined: Nov 2004
Posts: 118
Likes: 0
From: Pennsylvania
SBR 2.3 GT35R Dyno results

OK.. after discussing this kit in previous threads.. We have dynoed the car we were discussing. Its an 04 GSR, SBR stage 3 2.3 stroker kit and stage 6 head with an SBR GT35R. i will post the Dyno graph pics and see if i can get the videos up.. we made 465 AWHP at 22psi on 94 octane. The on 100 octane unleaded at 26 psi we made 546 AWHP. So we will be doing a straight ras gas run at around 30 psi to see what kind of power we will get out of it. You should be seeing this car as well as a couple others from SBR in Ohio April 15th.

Thanks
Mark
SBR



***EDIT*** here is the video link for the 546AWHP run:

http://www.slowboyracing.com/dyno_vids/evo546.mpg


here are some pics of the car
Attached Thumbnails SBR 2.3 GT35R Dyno results-evo94octanepump-small-.jpg   SBR 2.3 GT35R Dyno results-evo100octanepump-small-.jpg   SBR 2.3 GT35R Dyno results-evo-d-small-.jpg   SBR 2.3 GT35R Dyno results-evo-e-small-.jpg   SBR 2.3 GT35R Dyno results-evo-f-small-.jpg  


Last edited by SlowboyMR; Mar 22, 2005 at 11:12 AM.
Reply
Old Mar 22, 2005 | 10:23 AM
  #2  
evo_whiplash's Avatar
Evolved Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 1,001
Likes: 0
From: Central Texas
Nice numbers. How is the spool up?
Reply
Old Mar 22, 2005 | 10:27 AM
  #3  
Kwman's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2004
Posts: 1,536
Likes: 0
From: Wilmington NC/ Carolina Beach
Wow good to hear from you guys. I've been wondering whats goin on with the place, ordered some parts a while back. Great work man!
Reply
Old Mar 22, 2005 | 10:27 AM
  #4  
BSREVOLUTION's Avatar
Evolved Member
iTrader: (15)
 
Joined: Feb 2004
Posts: 512
Likes: 0
From: Bakersfield, CA
aem ems?
Reply
Old Mar 22, 2005 | 10:35 AM
  #5  
SlowboyMR's Avatar
Thread Starter
Former Sponsor
iTrader: (7)
 
Joined: Nov 2004
Posts: 118
Likes: 0
From: Pennsylvania
Originally Posted by evo_whiplash
Nice numbers. How is the spool up?
i will try to answer all the questions here..

Spool up is awesome. like 300 rpms different from stock.. maybe craig the owner will chime in too.. 1st gear it pulls harder than my R1. In a straight line 1st and 2nd full spin, and 3rd will spin a little and get going hard..

Yes its a AEM EMS, our FMIC kit.

Mark
Reply
Old Mar 22, 2005 | 10:39 AM
  #6  
Kwman's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2004
Posts: 1,536
Likes: 0
From: Wilmington NC/ Carolina Beach
You have GOT to shoot some pics man. i wouldn't mind seeing this setup.
Reply
Old Mar 22, 2005 | 10:44 AM
  #7  
en1gma19's Avatar
Evolved Member
iTrader: (23)
 
Joined: Aug 2003
Posts: 2,041
Likes: 0
From: NC
Nice
Reply
Old Mar 22, 2005 | 11:13 AM
  #8  
SlowboyMR's Avatar
Thread Starter
Former Sponsor
iTrader: (7)
 
Joined: Nov 2004
Posts: 118
Likes: 0
From: Pennsylvania
Originally Posted by Kwman
You have GOT to shoot some pics man. i wouldn't mind seeing this setup.
posted them in the original post.. if you want more, email me

Thanks
Mark
SBR
Reply
Old Mar 22, 2005 | 11:24 AM
  #9  
craigbb's Avatar
Newbie
iTrader: (2)
 
Joined: Nov 2004
Posts: 58
Likes: 0
actually we dynoed 26psi with 1/4tank 94 and 8 gall 100 oct so was more like 98 octane..probably would of seen tad higher hp# on straight 100oct..i have driven the car as its setup now over 1500 miles in a few weeks its a blast to drive..we drove it on the street on the 550awhp tune around town after dynoing and it was incredible to say the least
Reply
Old Mar 22, 2005 | 03:42 PM
  #10  
Aby@MIL.SPEC's Avatar
Former Sponsor
iTrader: (161)
 
Joined: Jun 2003
Posts: 3,043
Likes: 13
From: San Elijo Hills, Ca.
Nice numbers.

Why didnt you run it higher in the revs while on 94 octane? It looks like you stopped @ 6k.
Reply
Old Mar 22, 2005 | 03:52 PM
  #11  
SlowboyMR's Avatar
Thread Starter
Former Sponsor
iTrader: (7)
 
Joined: Nov 2004
Posts: 118
Likes: 0
From: Pennsylvania
Originally Posted by WOT
Nice numbers.

Why didnt you run it higher in the revs while on 94 octane? It looks like you stopped @ 6k.
we were dynoing in steps to be safe. ran higher rpms with each pull.
Reply
Old Mar 22, 2005 | 03:58 PM
  #12  
1NastyEvo's Avatar
Evolved Member
iTrader: (10)
 
Joined: Aug 2004
Posts: 1,328
Likes: 0
From: Southern California
Wow
Reply
Old Mar 22, 2005 | 04:08 PM
  #13  
re-EVO-lver's Avatar
Newbie
 
Joined: Mar 2004
Posts: 16
Likes: 0
how much? how soon? and where? ;o)
Reply
Old Mar 22, 2005 | 04:11 PM
  #14  
thatsMR2u's Avatar
Evolved Member
iTrader: (19)
 
Joined: Sep 2004
Posts: 924
Likes: 0
what do you consider your redline now with the stroker kit
Reply
Old Mar 22, 2005 | 04:15 PM
  #15  
DynoFlash's Avatar
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally Posted by SlowboyMR
OK.. after discussing this kit in previous threads.. We have dynoed the car we were discussing. Its an 04 GSR, SBR stage 3 2.3 stroker kit and stage 6 head with an SBR GT35R. i will post the Dyno graph pics and see if i can get the videos up.. we made 465 AWHP at 22psi on 94 octane. The on 100 octane unleaded at 26 psi we made 546 AWHP. So we will be doing a straight ras gas run at around 30 psi to see what kind of power we will get out of it. You should be seeing this car as well as a couple others from SBR in Ohio April 15th.

Thanks
Mark
SBR



***EDIT*** here is the video link for the 546AWHP run:

http://www.slowboyracing.com/dyno_vids/evo546.mpg


here are some pics of the car
Glad you can make it to our little party ion the 15th ! Poor subaru guys
Reply



All times are GMT -7. The time now is 11:33 AM.