Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

GSC 262in/272ex Cam Dyno Results (dynoflashed)

Thread Tools
 
Search this Thread
 
Old Mar 28, 2005 | 08:16 PM
  #61  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
I added a HKS RS intake and the GSC cams, thats not a lot. before those mods I was making 286whp and 314TQ would you like to see that graph, those numbers I thought were on the low side.
Reply
Old Mar 28, 2005 | 08:19 PM
  #62  
gsujeff55's Avatar
Evolved Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,838
Likes: 1
From: GA
you added a custom dynoflash, right?
Reply
Old Mar 28, 2005 | 08:24 PM
  #63  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
yes, but comparing it to my old dyno which was also a custom dynoflash i picked up 58whp and 29tq peak. I'll post my old custom dynoflash sheet before the intake and cams if you want. I dont know what your getting at, since i had a custom tune before, then installed the intake and cams, then before the flash did the dyno pull, then got a flash after the custom tune. Both numbers were pretty impressive before and after the tune.
Reply
Old Mar 28, 2005 | 08:26 PM
  #64  
gsujeff55's Avatar
Evolved Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,838
Likes: 1
From: GA
Ok, didn't know you had a custom tune on the 286 dyno.

I thought you added your first custom tune with the cams and intake.
Reply
Old Mar 28, 2005 | 08:31 PM
  #65  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
Just to back up my story...

Reply
Old Mar 28, 2005 | 08:39 PM
  #66  
2MANYCARS's Avatar
Evolving Member
iTrader: (2)
 
Joined: Oct 2004
Posts: 131
Likes: 0
From: Long Island
Nice numbers.
Reply
Old Apr 3, 2005 | 08:07 AM
  #67  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
Should be in stock by the 21st of this month at Logicperformance, hopefully even earlier!
Reply
Old Apr 4, 2005 | 09:54 PM
  #68  
BigLEVO's Avatar
Evolving Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 270
Likes: 0
From: Illinois
hows is the idle with these cams? anythin like stock? or do you get he lumpy idle with those cams too?
Reply
Old Apr 5, 2005 | 04:16 AM
  #69  
Jorge T's Avatar
Evolved Member
iTrader: (18)
 
Joined: May 2004
Posts: 1,494
Likes: 1
From: Houston, TX
Are GSC cams re-branded Buddy Clubs?
Reply
Old Apr 5, 2005 | 07:36 AM
  #70  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
Originally Posted by Jorge T
Are GSC cams re-branded Buddy Clubs?
no
Reply
Old Apr 5, 2005 | 07:37 AM
  #71  
Willie Dynamite's Avatar
Evolved Member
iTrader: (17)
 
Joined: Sep 2004
Posts: 818
Likes: 0
From: West Chester, PA
Originally Posted by Jorge T
Are GSC cams re-branded Buddy Clubs?
I heard Buddy clubs are Tomei cams.
Reply
Old Apr 5, 2005 | 07:38 AM
  #72  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
Originally Posted by BigLEVO
hows is the idle with these cams? anythin like stock? or do you get he lumpy idle with those cams too?
I've posted on this topic a few times, there is a video a page or two back also. But the cams idle almost like stock 1-10 1 being the 280 idle and 10 being stock probably like a 8.5 or 9.

Just read this post over and It will answer almost all your questions.
Reply
Old Apr 5, 2005 | 07:39 AM
  #73  
Evo11V's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (18)
 
Joined: Apr 2003
Posts: 1,536
Likes: 31
From: Tewksbury, NJ
Originally Posted by Willie Dynamite
I heard Buddy clubs are Tomei cams.
Have no idea, I just know GSC cams are GSC cams with similar specs to the hks cams, but the gsc cams are giving better numbers on the dyno then gsc cams.
Reply
Old Apr 5, 2005 | 07:44 AM
  #74  
berkel's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2003
Posts: 651
Likes: 1
Originally Posted by Willie Dynamite
I heard Buddy clubs are Tomei cams.
The Buddy Club and GSC have identical (or at least VERY similar) specs to the HKS in terms of lift and duration. Both are cheaper than the equivalent HKS. So far, members (evotexas with 272/264 and evO11V WITH 264/272) have had great numbers with the GSC cams. I actually have the Buddy Clubs getting installed this Thurs, but I probably won't have a dyno for awhile. I can post my impressions for sure.

Take care,

FB
Reply
Old Apr 5, 2005 | 07:45 AM
  #75  
Willie Dynamite's Avatar
Evolved Member
iTrader: (17)
 
Joined: Sep 2004
Posts: 818
Likes: 0
From: West Chester, PA
But who makes the Buddy Club cams?

For the record I ordered GSC cams.
Reply



All times are GMT -7. The time now is 12:53 AM.