Atp turbo kit owners

Reply Subscribe

Thread Tools

Search this Thread

Nov 17, 2005 | 08:16 PM

#61

vtec70

Newbie

Joined: Jul 2003

Posts: 8

Likes: 0

From: Singapore

Quote:

Originally Posted by 8URVTEC

Can someone host this dyno sheet? I made 370whp and 340ft/lbs of torque with about 11.5 A/F ratio on a Dyno Dynamics Dyno. This is done with the ATP 3037S kit with the .82 A/R at 24 psi on 91 pump gas. According to Richard from DynoComp that is about 502whp at the flywheel.

Nice number.

I was thinking of getting this turbo. How laggy is the low - mid power? Any other mods to the engine?

Nov 17, 2005 | 11:26 PM

#62

Evolving Member

Joined: Jun 2004

Posts: 208

Likes: 0

Nice numbers....

I did my ATP 35r 0.63 ar kit on a 2.3L with more supporting mods...

It put down 471 wheel horse power & 65NM of torque on a dynoPack...It is on 93 octane at 29psi...I dun dare to push it further on the boost level...

So far on the str8s, the evo pulls like mad especially from third gear onwards all the way to 7.5k rpm (my cut is at 8.5k rpm)...Adrenaline rush....

Fitment wise needs abit of adjustment to the downpipe but it can be rectified easily with a season hand....

cheers.....

Quote:

Originally Posted by 8URVTEC

Nov 18, 2005 | 04:46 AM

#63

8URVTEC

Evolved Member

iTrader: (13)

Joined: May 2005

Posts: 653

Likes: 0

From: Las Cruces, NM

Quote:

Originally Posted by vtec70

Nice number.

I was thinking of getting this turbo. How laggy is the low - mid power? Any other mods to the engine?

It is a bit laggy, starts spooling at around 3500 rpm and full boost at around 4200 rpm. Everything is made up top, I have HKS 272 cams, APS CAI, APS FMIC, 1000cc AMS injectors, tuned with EcuTek and a boost controller set at 21 psi on 91 and 25 psi on 100 octane.