New Forge RS BOV
Newbie
Joined: Oct 2004
Posts: 56
Likes: 0
From: Madison, WI
Originally Posted by Mike@Forge
Now that we have 11 people, we just hit a 25% discount. 10 more people and the discount will go to roughly 35%.
I like the new design! I hope it will work well because I like how it can the spring tension can be adjusted to 34psi. Been waiting for something like this after I sold my gfb. By any chance can Mike/Forge provide a pic of what will come with the full kit, recirc and vta?
Below are pictures of what comes with each valve:
FMDVRS-R
FMDVRS-A
FMDVRS-K
For everyone's reference, each bottom port, side port, and horn is sealed to the main valve body with a silicone o-ring to provide a tight seal and prevent any boost or vacuum leaks.
Also, each FMDVRS-K will include instructions on how to change the valve from Recirc. to Atmo. and vice/versa.
FMDVRS-R
FMDVRS-A
FMDVRS-K
For everyone's reference, each bottom port, side port, and horn is sealed to the main valve body with a silicone o-ring to provide a tight seal and prevent any boost or vacuum leaks.
Also, each FMDVRS-K will include instructions on how to change the valve from Recirc. to Atmo. and vice/versa.
Last edited by Mike@Forge; Jul 24, 2005 at 11:05 AM.
Newbie
Joined: Oct 2004
Posts: 56
Likes: 0
From: Madison, WI
Originally Posted by vtsnake
CLICK HERE FOR GROUP BUY! Just Two More!!!!!
Originally Posted by Mike@Forge
Two more people and I'll throw in hose clamps too! 
(They're normally not included and cost $2.50 each.)
(They're normally not included and cost $2.50 each.)
You talkin about those worm gear, marine quality, N.A.T.O approved hose clamps?
Last edited by Compjoc; Jul 25, 2005 at 06:37 PM.
Maybe owner of other cars can join in as well