Helix 720cc injectors debut!
#1
Former Sponsor
Thread Starter
iTrader: (206)
Join Date: Oct 2002
Location: Santa Ana, California
Posts: 5,762
Likes: 0
Received 3 Likes
on
3 Posts
Helix 720cc injectors debut!
Helix 720cc injectors:
Helix Injectors are custom manufactured in Japan by a world-famous OEM parts manufacture. The injector on-time, spray pattern, and flow rate are all properly matched for maximum power and reliability. In addition, all Helix injectors are carefully flow tested to ensure identical flow rates and top quality.
Helix injectors are only available in 720cc for the Lancer Evolution. These injectors are specifically designed to aid your tuners in easy tuning for maximum power and response time.
- Helix design on time and spray pattern for maximum power output
- Manufactured by world renounce O.E.M manufacture
- Cheap and affordable compare to Greddy
- Excellent build quality compared to Lucus made injectors
- Manufacture with easy to scale and tune in mind
We have done extensive testing on these injectors in order to make sure they are easy to scale for any users. The build quality is excellent since it’s designed and manufactured in Japan. Why pay so much for Greddy when you can get the Helix for much less with the same if not better quality!!
Thanks,
Tom
Last edited by Gruppe-S; Nov 21, 2005 at 06:40 PM.
#3
Former Sponsor
Thread Starter
iTrader: (206)
Join Date: Oct 2002
Location: Santa Ana, California
Posts: 5,762
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by timzcat
Do you have injector latency or battery compensation figures for these injectors?
On Time: 0.65ms / 12.5v /2.5kg/mm
Specification: Low Impedence / Top Feed
Thanks,
Tom
#4
Assuming they are calling "on time" as the latency or the amount of time it takes to turn then on, they are very impressive figures.
That is stock quality latency.
Need a tester for these injectors? I'd be happy to put them in my car and see how they act with Ecutek tuning in comparison to the PE injectors. PE battery compensation is more then 2.5 times what these are. Therefore I believe the idle and low speed driveability would be much better on these injectors. Have you guys played around with these yet?
That is stock quality latency.
Need a tester for these injectors? I'd be happy to put them in my car and see how they act with Ecutek tuning in comparison to the PE injectors. PE battery compensation is more then 2.5 times what these are. Therefore I believe the idle and low speed driveability would be much better on these injectors. Have you guys played around with these yet?
Trending Topics
#8
Originally Posted by Gruppe-S
Why pay so much for Greddy when you can get the Helix for much less with the same or not better quality!!
Thanks,
Tom[/B]
Thanks,
Tom[/B]
I think you should the the OR to IF
#10
EvoM Guru
iTrader: (8)
Originally Posted by timzcat
Therefore I believe the idle and low speed driveability would be much better on these injectors. Have you guys played around with these yet?
I have them and they idle like stock. Great injectors. However, since you said you have a ECUTEK tune, your tune might have been done to your current larger injectors so your mileage might vary. I do not have a reflash but a piggyback.
#11
Former Sponsor
Thread Starter
iTrader: (206)
Join Date: Oct 2002
Location: Santa Ana, California
Posts: 5,762
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by razorlab
I have them and they idle like stock. Great injectors. However, since you said you have a ECUTEK tune, your tune might have been done to your current larger injectors so your mileage might vary. I do not have a reflash but a piggyback.
Just like any other injectors, you will need to tune it either with a flash, EMS, or SAFC.
Thanks,
Tom
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Evo 'For Sale' External Engine / Power
21
May 1, 2007 01:42 PM
Gruppe-S
Evo 'For Sale' External Engine / Power
35
Apr 9, 2007 08:21 PM
Gruppe-S
Evo 'For Sale' External Engine / Power
6
Jan 7, 2007 06:18 PM
Gruppe-S
Evo 'For Sale' External Engine / Power
14
Aug 22, 2006 09:25 PM
Gruppe-S
Evo 'For Sale' External Engine / Power
33
Feb 14, 2005 10:41 AM