Gsc 264/274's are bigger injectors needed?
Gsc 264/274's are bigger injectors needed?
Hey guys will be getting these cams soon. I have a EvoVII with stock turbo:- I have tubalur mani, turbo back exhaust, intake, fuel pump, power fc and boost controller.
Will my stock injectors be okay to run these cams as I would rather get injectors the same time as the cams if needed.
Thanks in advance.
Paul
Will my stock injectors be okay to run these cams as I would rather get injectors the same time as the cams if needed.
Thanks in advance.
Paul
It really depends on how much boost you want to run. Do you have anyway of checking your duty cycle? I would be willing to bet that your stock injectors are close to maxed right now (maxed meaning 90%+) at WOT.
I would get some monitoring tools/piggy back so you can get the crutial information about your engine status.
I would get some monitoring tools/piggy back so you can get the crutial information about your engine status.
Trending Topics
Certainly can be done on the stock injectors. However, I was seeing 90%+ idc and lowing timing numbers near redline before I put in larger injectors. Now idc stays under 85% and I've got more timing than I know what to do with.
Thread
Thread Starter
Forum
Replies
Last Post
RSGuy
Evo Engine / Turbo / Drivetrain
28
Apr 7, 2011 04:34 PM
evotino
General Engine Management / Tuning Forum
16
Nov 13, 2005 01:57 PM



