any pics of br-fp3065
Originally Posted by Jrod@Buschur
My car went 11.04 @ 128mph on a 92 degree day with a 1.74 60'. My car is full weight and running 18" VOLKS w/ BFG KDW tires.
My car on our dyno made 342whp on 22psi and straight 94 octane. With C-16 and 29psi it made 462whp. This was all done on a 100% stock ignition, intake manifold, throttle body, head and block. My car is only running our stages 1-4 w/ HKS 272 cams, AEM EMS and this turbo kit.
I just did a few more upgrades but i'm still running the 3065. I want to max it out. I'm going to run it for the first time with the new toys next weekend here at Norwalk at the NOPI World Finals. Shootin for mid 10's now.
I am still planning to run my 18" VOLKS and BFG KDW-2's at this event. I dont want to change that stuff because I want it to run the #'s it is going to just the way it sits.... Just the way I drive it on the street. I will make a post after the event to let you guys know what the outcome was.
My car on our dyno made 342whp on 22psi and straight 94 octane. With C-16 and 29psi it made 462whp. This was all done on a 100% stock ignition, intake manifold, throttle body, head and block. My car is only running our stages 1-4 w/ HKS 272 cams, AEM EMS and this turbo kit.
I just did a few more upgrades but i'm still running the 3065. I want to max it out. I'm going to run it for the first time with the new toys next weekend here at Norwalk at the NOPI World Finals. Shootin for mid 10's now.
I am still planning to run my 18" VOLKS and BFG KDW-2's at this event. I dont want to change that stuff because I want it to run the #'s it is going to just the way it sits.... Just the way I drive it on the street. I will make a post after the event to let you guys know what the outcome was.I was the tall guy haha
Originally Posted by 1NastyEvo
Freakin sweet!! Thank's for sharing Jarrod! I still remember when we walked over to you're charger rental back when you were here in Glendale CA to get us our shirts haha.
I was the tall guy haha
I was the tall guy haha
Take care man!
Originally Posted by Jrod@Buschur
You dont know for sure I did a built 2.0, head and COP do ya?
Maybe even ported stock intake manifold and 65mm tb...but it would be impressive to see what could be had without those two parts. I'd like to see some revolvers thrown in there too while you were at it....
Last edited by kmcconn9; Oct 5, 2006 at 10:51 AM.
Originally Posted by kmcconn9
I think I do.....
Maybe even ported stock intake manifold and 65mm tb...but it would be impressive to see what could be had without those two parts. I'd like to see some revolvers thrown in there too while you were at it....
Maybe even ported stock intake manifold and 65mm tb...but it would be impressive to see what could be had without those two parts. I'd like to see some revolvers thrown in there too while you were at it....
!!Go to smack the stock block record!!10.87@127MPH.
Originally Posted by kmcconn9
I think I do.....
Maybe even ported stock intake manifold and 65mm tb...but it would be impressive to see what could be had without those two parts. I'd like to see some revolvers thrown in there too while you were at it....
Maybe even ported stock intake manifold and 65mm tb...but it would be impressive to see what could be had without those two parts. I'd like to see some revolvers thrown in there too while you were at it....
In time. If I ever find a helmet to make a few runs Ill post up the time slip. I still have the stock bottom, head, tb, flashed ecu. But I have 264/272, not that it makes that much of a difference. But I want to find the limits of the Ecu before I make a switch to an AEM, Microtech set-up. All in all I really think that this turbo can do 9's, there probably only about 25-30 people running this turbo on the Evo so it's still fairly brand new to the market. Im happy with mine so far.
After I find out what my best run could be, revolvers are going in. But I think Tomei Procams might be a better choice. Then FP makes CHRA FP3575 after the best new cam run.
JRod, Ill be giving you a call on Tuesday.
Thanks Ang for putting that up. 10.87 is getting closer.
Last edited by dryad001; Oct 6, 2006 at 05:59 PM.
Evolved Member
Joined: May 2006
Posts: 576
Likes: 0
From: Annandale, NJ
Slightly off topic in a way, and I don't mean to jack the thread but how does the 3065 compare to the 50trim hp # wise? My buddy on a built 2.0 on pump in a 2G made 430whp @ 23ish psi if I remember correctly
Evolved Member
Joined: May 2006
Posts: 576
Likes: 0
From: Annandale, NJ
thanks on rails, do you know power wise the difference, especially pump/meth comparison because i wouldn't run c16 every day
Last edited by Duby; Oct 7, 2006 at 08:39 AM. Reason: can't spell
Thanks for the pictures I think the set up looks great. Jarrod I hope to hear you make it in the 10s at the NOPI event.
I have two questions.
In this kit is the turbine side the 7cm or 8cm housing?
Can you get the wastegate routed back into the o2 housing?
thank you
Jeremy
I have two questions.
In this kit is the turbine side the 7cm or 8cm housing?
Can you get the wastegate routed back into the o2 housing?
thank you
Jeremy
