Where are you guys running nitrous getting the fuel feed from?

I've always taken it from the shrader vlave on the GM fuel rails. Is there fuel rail adapter available?

 

I run an Aeromitive AFPR, which has 2 "inlet" ports. Normally one is plugged. I reduced that to 4an, and it makes for a very convenient fuel feed for a nitrous kit. If you are not running an AFPR, it will take a little doing. First things that come to mind are aftermarket fuel rails that have a 1/8th NPT gauge port you could use, and converting the line from the fuel filter to the fuel rail to an and putting a tee or a gauge adapter inline.

 

i thought about doing an aftermarket fuel rail but i don't like the idea of the feed being before the #1 cynlinder, i could see some potential lean conditions when it comes one.