2.5l - 10.25:1 compression - EVO IX motor pictures!
Thread Starter
Account Disabled
iTrader: (17)
Joined: Dec 2004
Posts: 992
Likes: 0
From: Sanford, FL!!!
Car is in Oregon already -
We tested the car on the dyno last week - and due to a clogged cat con, we only ran 21 PSI - car made 420 ft/lbs at the wheels at 3300 RPM at only 21 PSI - cat con was then replaced and car now running 28 psi - but only had it on the street. When the car gets back in a few weeks - we will gladly put it on the dyno again for some real #'s.
Mike Huml
SBR Inc.
We tested the car on the dyno last week - and due to a clogged cat con, we only ran 21 PSI - car made 420 ft/lbs at the wheels at 3300 RPM at only 21 PSI - cat con was then replaced and car now running 28 psi - but only had it on the street. When the car gets back in a few weeks - we will gladly put it on the dyno again for some real #'s.
Mike Huml
SBR Inc.
Car is in Oregon already -
We tested the car on the dyno last week - and due to a clogged cat con, we only ran 21 PSI - car made 420 ft/lbs at the wheels at 3300 RPM at only 21 PSI - cat con was then replaced and car now running 28 psi - but only had it on the street. When the car gets back in a few weeks - we will gladly put it on the dyno again for some real #'s.
Mike Huml
SBR Inc.
We tested the car on the dyno last week - and due to a clogged cat con, we only ran 21 PSI - car made 420 ft/lbs at the wheels at 3300 RPM at only 21 PSI - cat con was then replaced and car now running 28 psi - but only had it on the street. When the car gets back in a few weeks - we will gladly put it on the dyno again for some real #'s.
Mike Huml
SBR Inc.
Thread Starter
Account Disabled
iTrader: (17)
Joined: Dec 2004
Posts: 992
Likes: 0
From: Sanford, FL!!!
